Hi,
I understand that majority of enthusiasts are after the clarity and maybe light roast. But after awhile using df64 even with ssp cast burrs, I'm really missing the thick/syrupy /chocolate texture of say the varios/niche profiles for my milk drinks.
Does anyone know of any...

After a long time lurking on this forum and being inspired by the very many threads, I took the plunge and decided to make a project out of refurbishing a lever. First a tour of the machine:

This is a 1957 2nd gen Urania - mid generation single group. It has a 1st gen...

Hello everyone,

I've been looking to upgrade my sette 270 as it's not keeping up with the LMLM and i'm getting terrible consistency.

I've been looking at the below options and they range in price range but i need some help to make my final decision. I only grinder for...

I've been idly wondering about levers recently, and whether i might be a good candidate for one. While I've enjoyed the decent a lot, and think that it's a particularly great tool for learning, I'd like to have something with simplicity and more of a tactile response.

What i...

I have lurked for a long time on these forums and have been guided in my espresso adventures in learning from the valuable information posted by the many knowledgeable members here, and have just joined today as a member.

I have been contemplating buying a flat burr grinder to...

I've a Bezzera which has a problem with power trips.

I've disconnected the heating element and pump and it still trips.
It's annoying and probably dangerous each time it trips, it also pulls the circuit breaker and shut the whole place

How do repair centres isolate and keep...

I'm looking at a Quick Mill Anita on CL of uncertain age, steam wand through front panel, so prolly not EVO.
What are the models and is there a SN# with date info on this?
Clean and asking $750 USD, which is high, but if I sell my Silvia it's do able, and he may come down
They...

Hi,

I just try to update my Sette 270 wi and the display is just blinking and I can't use it.

Anyone got this problem?

It's been little over a year since I replaced the piston gaskets and now I need do to it again (same symptom of water spurting from the back of the group).

Could the relatively fast degradation be related to the fact that my MCaL is set to 1.2 bar and is powered on for several...

First off, hi! I'm new around here.

I'll get right down to it. Should I replace this older generation Silvia boiler with a new one or does it just need a good cleaning?

I bought an older Silvia to tinker with and the first thing I did was to dismantle the poor thing.

I finally received a much anticipated 5-pounder Malabar Gold from Josuma last week (roast date is for last week's batch, so May 9th). Even though it has many fans here, I could not find a good place where people's extraction parameters/thoughts/experiments on MG were...

I've seen a lot of positive post on this roaster. Where is the best place to purchase it?

Returned to SD after long stints in Seattle and the Bay. It's wonderful to see SD cafe scene has evolved beyond Birdrock.

Ive been making cafe runs to get an understanding of the scene here. One interesting observation is pour over seems to be less popular here compared to Bay...

I'm about ready to pull the trigger on this and wanted to know, for the people that own them, how they like the machine, what they don't like about it, would they do it again or buy something different? I have a Niche on the way already. Thanks

I'm looking to buy New baskets which do you recommend? Thank you

I've had this machine for several years and it's worked flawlessly. Each AM I turn it on, after warm up, pull a couple of double shots in the next hour or so and that's it. Several months ago the heater seemed to be acting funny so I looked into the reservoir and saw two pieces...

Hi everyone, was just curious to know if any of you use espresso grinders with doser but for home use? I know often they are used for higher volume applications, but wonder if any of you use for home use? Also do you fill up doser a bit or pre-measure beans first for one or two...

I am trying to to decide between the Caffewerks gaskets sold by Prima Coffee or the Cafelat ones, to replace the OEM rubber gasket in my ECM Puristika. I am inclined to go with the Caffewerks, but wanted to hear your opinions. Maybe there is no difference?
Also, should I use...

Hello, I have been struggling with my Hario scale for a while now, with my immersion/percolation combo brews. I like to steep a part of the brew weight, and pour over the remainder. The issue is Hario scale turns off automatically after not reading the change of weight for a...

Having just received a monolith with SLM burrs, I've realized that my previous V60/Origami target times of 4 minutes or so (with Niche zero) result in over extraction.

What are your target times for dialing in a pour over with similar grinders? Any other tips would be much...