What ratio citric acid / water to descale?

Beginner and pro baristas share tips and tricks for making espresso.
EspressoGirl
Posts: 79
Joined: 15 years ago

#1: Post by EspressoGirl »

Can anyone tell me what amount of food grade citric acid to use per quart of water to descale my espresso machine? (It has a 2 quart tank I fill). (Ex: is it 1 Tablespoon per quart of water, or 1 teaspoon or whatever?)

Also, does it matter if you use the coarse or fine crystals in terms of dissolving?

I was also told food grade citric acid is called soursalt sometimes. Anyone know if that is correct?

Thanks!

User avatar
GVDub
Supporter ♡
Posts: 519
Joined: 15 years ago

#2: Post by GVDub »

I use 1.5-2 TBLs/liter, which works very well for me.
"Experience is a comb nature gives us after we are bald."
Chinese Proverb
LMWDP#238

User avatar
another_jim
Team HB
Posts: 13871
Joined: 19 years ago

#3: Post by another_jim »

Yep. Go down to one tablespoon for aluminum parts. Also, don't freak if you see a greenish/bluish tinge when you rinse; that's normal for copper and brass parts.
Jim Schulman

User avatar
sweaner
Posts: 3013
Joined: 16 years ago

#4: Post by sweaner »

Sour salt is another name for citric acid.
Scott
LMWDP #248

cupojoe
Posts: 1
Joined: 15 years ago

#5: Post by cupojoe »

Jim,

What if it is "activated" citric acid? My machine is about 5 months old, we are in a hard water area. I have purchased Everpure descaler (activated citric acid) from espressoparts.com.
Still 1 Tbsl/Quart? Does it make a difference using "activated" for a Gaggia, with aluminum boiler? Thanks!

User avatar
another_jim
Team HB
Posts: 13871
Joined: 19 years ago

#6: Post by another_jim »

I'm not totally sure what "activated" means; but was told it is an additional ingredient that speeds up the action of the citric acid without increasing its strength. Using the standard amounts should work.

The issue with the Gaggia is preventing galvanic corrosion at the join between the lower brass part of the boiler and the upper aluminum part. Go a little easier on the citric concentration, and make sure you flush very thoroughly afterwards. Since the boiler is so small, the reduced concentration solution should still be effective.
Jim Schulman

EspressoGirl (original poster)
Posts: 79
Joined: 15 years ago

#7: Post by EspressoGirl (original poster) »

Well, I have a Gaggia Classic. Do they all have aluminum? I thought I read the newer ones changed that.

Should I just play it safe and go with 1TBSP per Liter?

Does coarse or fine matter?

Thnks.