Ash aftertaste...!?

Beginner and pro baristas share tips and tricks for making espresso.
Titans
Posts: 1
Joined: 15 years ago

#1: Post by Titans »

Long time lurker, first time poster here.

Up to a month ago I was pulling great espressos, but as of lately, I have been experiencing a terrible ash aftertaste in my shots.

I regularly de-scale my silvia along with removing and cleaning the group-head. I've cleaned out my grinder ( removed burrs and cleaned with brush / compressed air). Yet I'm still getting ash flavour in my cup.

I've tried brewing at lower temperatures but that doesn't seem to fix my problem.

Is there anything on the Barista's end which would contribute to an ash flavour? I'm starting to suspect my bean provider for I swear once I smelt ash while sniffing the whole beans. I know of no other mail-suppliers in the Toronto area, so I have not ventured to other shops as of yet.

Thanks, Adam

User avatar
another_jim
Team HB
Posts: 13871
Joined: 19 years ago

#2: Post by another_jim »

It's virtually always the coffee. Your roaster either fell asleep during a roast or got a new batch of Brasil or other low grown bean that can't take the heat.

For now, your best bet is to dose higher, grind coarser, and let it flow faster, to get a relatively underextracted shot. This will leave some the ash in the puck, and emphasize the lighter flavors. The downside is that the shot will be taste brighter and more cutting.

If it was a one time roasting slip up, no problem; but if your roaster actually bought a coffee that roasts ashy, and isn't noticing, you should be looking for a better one.
Jim Schulman

User avatar
malachi
Posts: 2695
Joined: 19 years ago

#3: Post by malachi »

If Jim's suggestions don't solve the problem, you can also reduce brew temp. With some specific coffees, a higher brew temp sometimes results in an ashy (not smokey, not tobacco, but ashy) aftertaste.
What's in the cup is what matters.