Before accessing this forum, please review the site's Terms of use . Pay careful attention to this reminder:
By accessing this forum, you agree to the site's Terms of use . If you do not agree with these terms, do not access the Repairs, Restorations & Mods forum.
This is for the Livia 90 and some Bezzera machines.
The filter, with the valve below is loose on the bottom of the tank. How do I remove/tighten it?
Thanks
I've been wanting to get into coffee machine repair for a while now and it would seem that my prayers have been answered by a cheap Barista Express from a junk shop. I've cleaned it up and run some water through it but it seemed to have trouble holding it's water as it...
I was hoping someone might be able to help me with some technical issues I've been having with my machine. Now it's generally a consistent and overall good machine. But lately its been acting a little weird. Now since I've got it (number 2 owner)...
I'm in the process of refurbishing an otherwise excellent Dalla Corte Mini espresso machine and the vibe pump supports are shot - I've never liked the std high-durometer black rubber supports/mounts.
Has anyone found a good solution, something like a softer...
I have a Pavoni with the 4-prong heating element with no thermostat. The original brass heating element stopped working, so I recently replaced all the wires, which did not fix the issue with the original brass heating element, and so I purchased a 4-prong new heating...
We recently bought an old Pasquini Livia 90 and it turned out needed some attention.
I replaced the pump and it worked perfectly, but when I left the machine on, it shut off after a few hours, with only the power light on -- in case you're wondering it was not the water level....
Purchased a used Lelit Mara (not an X) about four months ago and in the last week found that it was overheating. (It hadn't been before.) The group head thermometer is hitting high 220s at which point the machine began to make some very loud noises. Released steam and drained...
I have an old Bezzera Hobby which I bought used and now served me well for over 2 years.
Today the machine started to not put out any water after the brewing group. The machine started with dripping water and steam out of the brewing group several weeks before. I...
Hi, it looks like my Izzo Alex Duetto II expansion valve has kicked the bucket. I've been unable to remove the spring inside despite best efforts. Perhaps there's scale buildup preventing the spring from coming out. My machine is from 2012, bought in Canada, though I'm now...