Isomac Tea with Gicar NRL30 - wiring help? - Page 2
-
- Posts: 1
- Joined: 2 years ago
Hello,
I have the same problem with my euro 2000 machine replacing the gimme controller. The Euro 2000 is basically a millennium clone/
I really will appreciate if you can upload some photos of the wiring setup on your millennium.
thanks.
I have the same problem with my euro 2000 machine replacing the gimme controller. The Euro 2000 is basically a millennium clone/
I really will appreciate if you can upload some photos of the wiring setup on your millennium.
thanks.
-
- Posts: 7
- Joined: 2 years ago
Just wanted to extend my thanks to you Iso_Millenium! Your topic, excellent photos and the contribution from other members in this post helped me to replace a faulty PRAL3 with the near-equivalent NRL30 in my Isomac Tea (2011).Iso_Millenium wrote:Hi all,
It took a while to get sorted but I have jumped the cables as described in the 3rd picture I posted. Machine turned on nicely and is brewing coffee again.
Thanks for all the help.
Cheers,