Before accessing this forum, please review the site's Terms of use . Pay careful attention to this reminder:
By accessing this forum, you agree to the site's Terms of use . If you do not agree with these terms, do not access the Repairs, Restorations & Mods forum.
Video pretty much explains it all. I turn on the machine, 2 coils get power on (they shouldnt be turning on), instantly opening up 2 valves. 1 reservoir over fills along with the boiler. Weirdly enough, the other reservoir does not overfill )valve doesnt open). Goal, need to...
I have an Elektra T3 2G. The unit was working properly. We had a quick power outage in the neighborhood, the power returned in a few seconds and at that point I heard a loud pop, and a visible spark from within the T3. Then, No power to the unit. I checked the...
I have a hard to find gauge and wanted to know if it can be rebuilt. I know it might be expensive and time consuming but I just want to know if it can even be done. My pump pressure gauge is stuck at 7 bar. Is there a method for cleaning one? I know I can just go get a new one...
I purchased a Gaggia Classic from Facebook Marketplace. Replaced the gasket for good measure, added a brass dispersion plate, added an IMS screen, and added the Barista Gadgets PID mod. Also switched to bottomless portafilter with IMS basket. Dialed in both a light roast and a...
I was given a Casadio Unidici A1 machine (build date December 2017) that has something wrong with it by a local bar manager I'm good friends with. Instead of fixing the machine or figuring out what's wrong with it, one of their liquor distributors just give them a new one.
Purchased a used Lelit Mara (not an X) about four months ago and in the last week found that it was overheating. (It hadn't been before.) The group head thermometer is hitting high 220s at which point the machine began to make some very loud noises. Released steam and drained...
Hey! Long-time lurker here... My BES920XL developed a super slight leak in the boiler, only noticed because it was slightly audible and the pump would run at random times. It took an unreasonable amount of dissembly and investigation to diagnose, but it was leaking ever so...
I have a Breville Infuser that is 13 years old. Worked great for several years but eventually solenoid issue arose. I couldn't get parts at the time , so I packed it up and it has sat in storage for 5 years now. I've pulled it back out and I think I could make the necessary...