Custom Wood for your Espresso Machine - Page 164

Read about current and future offerings from the site sponsors.
User avatar
cannonfodder (original poster)
Team HB

#1631: Post by cannonfodder (original poster) »

Bacote for a Nice Zero grinder and LaPavoni espresso machine.

Dave Stephens

User avatar
happycat

#1632: Post by happycat »

Haven't been to an art exhibit for a couple years due to CoVid... but going back through a year and a half of your posts was immensely satisfying. Mastery + aesthetic sense. In some cases your work seems far more beautiful than the machine it was installed on :D
LMWDP #603

CafelatStore: home of Cafelat products online
Sponsored by CafelatStore
User avatar
cannonfodder (original poster)
Team HB

#1633: Post by cannonfodder (original poster) »

Bunch of big parts in figured walnut. It took some time to track down a 12 inch wide 4/8 walnut board to make everything from. Stairstep holder for Lyn Weber bean cellars, an accessory block to hold a bunch of assorted parts, added a walnut handle to the dustpan and made a surround for an ECM tamping station to cover it in walnut. Should drop right over the stainless box.







Dave Stephens

User avatar
cannonfodder (original poster)
Team HB

#1634: Post by cannonfodder (original poster) »

Paduk and Gabon ebony caps for Monolith grinders.

Dave Stephens

User avatar
cannonfodder (original poster)
Team HB

#1635: Post by cannonfodder (original poster) »

Cocobolo for a Lelit Maria

Dave Stephens

User avatar
cannonfodder (original poster)
Team HB

#1636: Post by cannonfodder (original poster) »

Another batch of Padauk Monolith caps.

Dave Stephens

michael

#1637: Post by michael »

Do you have any more Gabon ebony caps that would fit my MAX that was delivered in April 8)

BPlus: turning your coffee spirit
Sponsored by BPlus
User avatar
cannonfodder (original poster)
Team HB

#1638: Post by cannonfodder (original poster) »

Cocobolo with a gloss finish for a Decent Espresso machine.


Dave Stephens

User avatar
cannonfodder (original poster)
Team HB

#1639: Post by cannonfodder (original poster) »

Curly walnut caps for Monolith grinders. 3 gloss and one satin finish. Most are for sale if you are looking for one.



Dave Stephens

User avatar
cannonfodder (original poster)
Team HB

#1640: Post by cannonfodder (original poster) »

Some of the weekend's work. Walnut parts for an ECM and Mazzer Mini grinder. Hopper lid, grind adjustment lever, couple portafilter handles, flow control knob, and the steam/water/brew joystick controls.

Dave Stephens