Read about current and future offerings from the site sponsors.
cannonfodder (original poster)
Team HB
Posts: 10507 Joined: 19 years ago
#1621 :
Post
by cannonfodder (original poster) » June 21st, 2021, 4:41 pm
There can be differences in the width, height, and angle of the locking lugs brand to brand. My LM portafilters will not fit in my elektra, my elektra portafilters are loose in my LM, my VBM portafilters fit the LM , Elektra and VBM but are a litle tight in the elekta and loose in the LM, and so on.
Dave Stephens
cannonfodder (original poster)
Team HB
Posts: 10507 Joined: 19 years ago
#1622 :
Post
by cannonfodder (original poster) » June 23rd, 2021, 5:04 pm
Couple Weber workshops bean cellar holders in Oak and Walnut.
Dave Stephens
Sponsored by Aida Batlle - Indigo Reserve from world renowned Finca Kilimanjaro in El Salvador
cannonfodder (original poster)
Team HB
Posts: 10507 Joined: 19 years ago
#1623 :
Post
by cannonfodder (original poster) » June 24th, 2021, 10:49 am
Cherry portafilter, lever, endcaps, steam/water controls for a Londinium R24, and a cap for a Monolyth grinder.
Dave Stephens
Frenchman
Posts: 402 Joined: 14 years ago
#1624 :
Post
by Frenchman » June 27th, 2021, 3:59 am
cannonfodder wrote: Couple Weber workshops bean cellar holders in Oak and Walnut.
Beautiful. How much are those? Do you make those for the Craig Lyn bean vaults too?
LMWDP #712
cannonfodder (original poster)
Team HB
Posts: 10507 Joined: 19 years ago
#1625 :
Post
by cannonfodder (original poster) » June 27th, 2021, 11:23 am
Profitec pro 600 steam controls made to take the larger model 700 chrome caps and some side panels in walnut.
Dave Stephens
SandraF
Posts: 374 Joined: 3 years ago
#1626 :
Post
by SandraF » June 27th, 2021, 12:16 pm
@cannonfodder - I'm normally not attracted to walnut, but your bean cellar is stunning. The grain lines on the side is just dreamy. I really enjoy your talent.
cannonfodder (original poster)
Team HB
Posts: 10507 Joined: 19 years ago
#1627 :
Post
by cannonfodder (original poster) » July 4th, 2021, 11:11 am
Humidity has been horrible the past week which plays havoc on applying a finish. Ironwood burl for a Decent Espresso.
Dave Stephens
Sponsored by Cafelat UK - home of Cafelat UK products online
cannonfodder (original poster)
Team HB
Posts: 10507 Joined: 19 years ago
#1628 :
Post
by cannonfodder (original poster) » July 5th, 2021, 9:44 am
Olive wood for a Niche Zero grinder (base, tumbler holder, and 4 feet) and a La Marzocco style portafilter handle.
Dave Stephens
cannonfodder (original poster)
Team HB
Posts: 10507 Joined: 19 years ago
#1629 :
Post
by cannonfodder (original poster) » July 15th, 2021, 10:28 pm
Finished my first batch of caps for KafaTek. Monolith caps in Walnut, curly walnut, Ash, and a very dense and dark Wenge that almost resembles Ebony. The food-safe finish requires heat and UV light to cure the oil, so bake them on the deck in the 90+ degree sunlight.
Dave Stephens
cannonfodder (original poster)
Team HB
Posts: 10507 Joined: 19 years ago
#1630 :
Post
by cannonfodder (original poster) » July 21st, 2021, 5:38 pm
Bacote for a Nice Zero grinder and LaPavoni espresso machine.
Dave Stephens