Custom Wood for your Espresso Machine - Page 154

Read about current and future offerings from the site sponsors.
User avatar
cannonfodder (original poster)
Team HB

#1531: Post by cannonfodder (original poster) »

This one took a while. The owner wanted a shelf to hold his Lyn Weber Bean Cellar tubes. The problem was finding a way of mounting the thin shelf to the wall since you cannot have supports under it and a simple hanger would not hold. Went with a special floating shelf bracket machined from aluminum. It will give the shelf a floating appearance once mounted to the wall. That bracket is rated for near 100 pounds so holding a 3-pound shelf and coffee beans should be no issue. Also 2 portafilter handles and one machine handle for a Decent Espresso, Niche Zero grinder base, tumbler holder, and 4 feet all in a gloss finished Macassar Ebony.





Dave Stephens

ECM Manufacture: @ecmespresso #weliveespresso
Sponsored by ECM Manufacture
User avatar
cannonfodder (original poster)
Team HB

#1532: Post by cannonfodder (original poster) »

Just a little cocobolo and an extended brew lever.

Dave Stephens

User avatar
cannonfodder (original poster)
Team HB

#1533: Post by cannonfodder (original poster) »

Expobar Brewtus and Niche Zero grinder parts in walnut. Steam, water, brew, flow control knob, slayer style portafilter handle, Niche base, feet, and tumbler/cup holder.

Dave Stephens

User avatar
cannonfodder (original poster)
Team HB

#1534: Post by cannonfodder (original poster) »

Couple Lyn Webber bean cellar holders in Walnut.

Dave Stephens

User avatar
cannonfodder (original poster)
Team HB

#1535: Post by cannonfodder (original poster) »

Black Walnut portafilter handles for a La Marzocco GS3 and a Decent Espresso.

Dave Stephens