Mini scale for Cafelat Robot - Page 4
-
- Posts: 187
- Joined: 5 years ago
Beurer KS36 is 9.5 cm (3.7") wide.
https://www.amazon.de/Beurer-Präzisions ... 003N2ALXI/
https://www.amazon.com/Beurer-KS36-Prec ... 003N2ALXI/
https://www.amazon.de/Beurer-Präzisions ... 003N2ALXI/
https://www.amazon.com/Beurer-KS36-Prec ... 003N2ALXI/
-
- Supporter ♡
- Posts: 60
- Joined: 5 years ago
This is the same as one of the earlier scales shown, and available in the USA. Unfortunately, the color is red. It has a timer, and the display stays on for several minutes. The readout is fairly large. It is a little finicky, as the weight drifts after sitting for a few seconds; the instructions even recommend taking your reading within 3-12 seconds. But on balance, it's the best scale I've seen for the Robot, and I'm enjoying having the built-in timer.
https://www.amazon.com/gp/product/B07MQ ... UTF8&psc=1
https://www.amazon.com/gp/product/B07MQ ... UTF8&psc=1
-
- Posts: 3910
- Joined: 12 years ago
I'm using the tough little AWS SM-501 500x0.01g scale I've owned for a number years, both for weighing beans and the shot. It works well. No timer, but it's inexpensive ($15) and responds quickly, catching up in just a little over one second.
-
- Posts: 36
- Joined: 5 years ago
I know the Lunar doesn't fit, but some people have reported success using a corner? Any Lunar uses care to post a picture of it in action with the Robot?
-
- Posts: 35
- Joined: 7 years ago
Additionally, would love to hear if anyone is using the corner of a Pearl. The new version has flow rate shown, which would be a nice easy way to profile on the Robot.
-
- Posts: 27
- Joined: 6 years ago
-
- Posts: 3910
- Joined: 12 years ago
https://edobarista.com/en/product/475-d ... -scale-edoEdoardo wrote:name now!...pleeeease :roll:
-
- Posts: 27
- Joined: 6 years ago
It's called Yagua Barista scale, but I think there are several scales with different names that are the sameEdoardo wrote:name now!...pleeeease