Want to talk espresso but not sure which forum? If so, this is the right one.
pGolay
Posts: 191 Joined: 5 years ago
#11 :
Post
by pGolay » March 31st, 2021, 9:12 pm
Very much a mock-celadon at best - I do not have access to anything other than mid-range oxidation firing at the moment so glazes are pretty pedestrian.
-PG
chipman
Posts: 1170 Joined: 16 years ago
#12 :
Post
by chipman » March 31st, 2021, 9:36 pm
Beautiful! now, all you need is a celeste colored Bianchi road bike to go with that cup.
pGolay
Posts: 191 Joined: 5 years ago
#13 :
Post
by pGolay » March 31st, 2021, 10:35 pm
Titanium all the way - 15 year old Litespeed.
Here're some stacking cups ~8 oz, 230 ml , Aeropress-friendly...
-PG
pGolay
Posts: 191 Joined: 5 years ago
#14 :
Post
by pGolay » September 12th, 2021, 4:22 pm
Here a few new espresso cups, plus a larger one.
-PG
yakster
Supporter ♡
Posts: 7345 Joined: 15 years ago
#15 :
Post
by yakster » September 12th, 2021, 9:49 pm
Nice espresso cups, I like the handles.
-Chris
LMWDP # 272
pGolay
Posts: 191 Joined: 5 years ago
#16 :
Post
by pGolay » October 11th, 2021, 11:57 am
A couple more - slowly adding to the worlds supply of espresso cups.
and one for the morning cup
-PG
★ Helpful
Chert
Posts: 3537 Joined: 16 years ago
#17 :
Post
by Chert » October 11th, 2021, 12:07 pm
Pascal,
I like those demitasse. Very nice. Thanks for sharing.
LMWDP #198
pGolay
Posts: 191 Joined: 5 years ago
#18 :
Post
by pGolay » October 27th, 2021, 11:06 pm
A couple more 'spressos came throught the pipe -
-PG
rhines44
Posts: 2 Joined: 2 years ago
#19 :
Post
by rhines44 » October 31st, 2021, 10:55 am
Here's a coffee mug and trivet set I created a while back. It was 3D designed, 3D printed in clay, then fired and glazed.
pGolay
Posts: 191 Joined: 5 years ago
#20 :
Post
by pGolay » October 31st, 2021, 9:52 pm
Nice - who did the 3d printing for this? I've only dealt with one outfit - marginal success...
-PG