Common Household Temporary Tampers - Page 2

Want to talk espresso but not sure which forum? If so, this is the right one.
Scott_G
Posts: 164
Joined: 10 years ago

#11: Post by Scott_G »

I made a tamper from PVC caps after reading online of someone else doing it. It was a 1 1/2in cap for the face with a 1in cap pressed in as the back, and after some 600 grit, it gave a decent polish. I sold a machine to a coworker and reluctantly gave him the tamper because he asked if it came with. It would have been a better fit for a 57mm basket, but it worked good enough for the 58mm.

Post Reply