Single Dose, Low Retention Grinder Project - Page 3
- MB (original poster)
- Posts: 792
- Joined: 10 years ago
Using that Pyrex dish (in the video) wasn't so smooth, so I made a little scale scoop. It flattens out the beans for spritzing and pours right in the Pharos opening.
Also, after a short amount of time using the Pharomatic a few notes:
Moving the socket to the zero point position by hand (in preparation for setting the pointer to an exact location) is very difficult, but can be done with a grippy rubber jar opener pad. It's not necessary for dialing in adjustments, until you want to mark the final setting on the scale below the pointer.
The output isn't clumpy at all. I'm still WDTing, until I get settled more. I have tried without WDT a couple of times, and no spritzing or obvious uneven pours, so we'll see.
Also, after a short amount of time using the Pharomatic a few notes:
Moving the socket to the zero point position by hand (in preparation for setting the pointer to an exact location) is very difficult, but can be done with a grippy rubber jar opener pad. It's not necessary for dialing in adjustments, until you want to mark the final setting on the scale below the pointer.
The output isn't clumpy at all. I'm still WDTing, until I get settled more. I have tried without WDT a couple of times, and no spritzing or obvious uneven pours, so we'll see.
LMWDP #472