Gene Cafe Mod Dimmer Arduino Wiring Question
-
- Posts: 1
- Joined: 2 years ago
I have a Question concerning my Gene Mod.
I have some K-Thermocouples with a Feather Huzzah to get my temp readings and now I'm ready to tackle the dimmer mod.
I first tried with a Dimmer/Control Unit, but it was to bulky and not easy to control by arduino.
So I bought this Dimmer https://robotdyn.com/dimmer-module-for- ... logic.html to control the heating element.
Now I'm not totally sure how to patch in the dimmer in my Gene because it's very different to my first dimmer mod (which was simply patched in line to the heater).
Any help how to implement this dimmer is greatly appreciated.
I have some K-Thermocouples with a Feather Huzzah to get my temp readings and now I'm ready to tackle the dimmer mod.
I first tried with a Dimmer/Control Unit, but it was to bulky and not easy to control by arduino.
So I bought this Dimmer https://robotdyn.com/dimmer-module-for- ... logic.html to control the heating element.
Now I'm not totally sure how to patch in the dimmer in my Gene because it's very different to my first dimmer mod (which was simply patched in line to the heater).
Any help how to implement this dimmer is greatly appreciated.