Before accessing this forum, please review the site's Terms of use . Pay careful attention to this reminder:
By accessing this forum, you agree to the site's Terms of use . If you do not agree with these terms, do not access the Repairs, Restorations & Mods forum.
I am hoping the wisdom of the collective can help me out. I am currently having issues with my Miele CM5200 Super Automatic machine. Originally very expensive it has provided 10 years of hassle free and decent coffee. What's happening now is that the pucks...
I was watching Facebook Marketplace and Craigslist for a while as I knew I wanted to purchase and fix a broken espresso machine. I'd never worked on one before, but I have some knowledgeable friends and access to Google - what could go wrong!
I had been looking at my local ads for a while waiting to pounce on a decent resto project. There are probably better machines out there, but this one is well documented on this site. And anything should be a workflow upgrade over my current Flair with an old DeLonghi EC680 for...
I picked up a non-functional Fiorenzato Bricoletta to repair, and I started tearing it down to clean it before really digging into the problem... and I don't recognize this part. I did a quick browse on espressoparts.com to see if I could visually match it, but had no luck. I...
Lately my machine has been doing as shown on the video.
Now the pressure seems to just slowly go up, and then suddently it goes nuts from there. I can depressurise it by turning the water steam on for a bit. But it will go to same state. Now i have had the valve up and...
My NS pump sometimes does not come on. I have to coax it with a few button pushes but usually (well so far always) ends up coming on and working. I was told it could be the capacitor but my experience with starter caps is they either work, or stop working. Is that the case here...
I rescued a neglected restaurant machine that will work with a deep clean. All buttons function individually but I can't seem to get into dose programming mode; the routine in the (likely newer) manual states hold STOP and the adjacent button simultaneously, which...
Hey guys, I am a newbie but love quality equipment and good coffee so we bought a Linea Mini and a Monolith Flat Max grinder. We had an espresso tech give us an at home demo and we were on our way making tasty espresso.
The Linea called for a firmware update which I did. Next...