Before accessing this forum, please review the site's Terms of use . Pay careful attention to this reminder:
By accessing this forum, you agree to the site's Terms of use . If you do not agree with these terms, do not access the Repairs, Restorations & Mods forum.
My ECM Elektronika I (single boiler with HX) only heats for 1 cycle, what I mean by this is:
I start the machine, it starts heating and the pressure creeps up to 1,5 bar, I hear the pressurestat clicking and the pressure starts dropping. When below c.1,2 bar i hear the...
Hello everyone,
I am a happy owner of the Crem one 2b r-lfpp (profiler). I always enjoyed joystick style valves more than rotary knobs. I wondered if anyone here has any experience with replacing the valves to joysticks or to different ones in general and if anyone has tips,...
Anyone know the inside diameter of the silicone milk hose going from the brew head of a Jura Giga X7 Pro to the milk container? Is there an industry standard for silicone tubing?
I bought a used Jura Giga X7 Pro and that owner got it without the accompanying Cool Control unit...
Hello hello! Coming back with another questions that I'm hoping to find the answer to. I have the older model GB5, and a dillema.
At idle the pressure is around 6-7 bars, on free flow without a portafilter the pressure shoots to around 14-15 bars, and when pulling a shot it...
I have a well maintained Izzo Duetto IV which is 2 years old and has a flow control kit.
I backflush 5x back to back once a week and the same but with detergent once every 3-4 months. Everything works fine - no pressure problems during brewing, excess tray dripping etc. V....
Dear Pros,
My Brasilia club keep pushing out the gasket -3 times. The 3rd time, it push gasket out when PID temperature is just 32 degrees.
Some people commented that because there is gap between upper part and lower part of boiler. Yes, when I bought it from owner, upper part...
We are coming up on two years of ownership of a Breville Dual Boiler. Between my spouse and I, we average 4-5 uses a day.
I noticed recently that there is a low volume hissing sound coming from the machine - already checked the wand, that's not it. Any other ideas? If there is...
I've had a Linea Mini for about 5 years and haven't had any major issues with it.
However, yesterday morning I noticed that the steam is not as dry as it used to be and it spits out more water than before. My wife also noticed that when the steam boiler is louder when heating...
I have a SAB Jolly Auto 2gr that is not holding a program. Both group heads are running and both the touchpads work. I've checked the flow meters and they seem ok. I'm getting the light flicker on both when in use. The problem I'm having is that the group head will run...