Before accessing this forum, please review the site's Terms of use . Pay careful attention to this reminder:
By accessing this forum, you agree to the site's Terms of use . If you do not agree with these terms, do not access the Repairs, Restorations & Mods forum.
Well, yes... it has... but I don't understand why...
I am doing a frame off restoration of an old Astoria 2 group machine and it has the normal dual pressure gauge. I am reassembling the machine, and ran it a bit to check for leaks and test the electronics. And I noticed that...
I have a Pavoni with the 4-prong heating element with no thermostat. The original brass heating element stopped working, so I recently replaced all the wires, which did not fix the issue with the original brass heating element, and so I purchased a 4-prong new heating...
I just installed the Retro FitKit and it find the machine, and connects - Then asks to Scan QR Code, and the QR code is so small that my new RetroFit Kit came with that it maybe fills 25% of the orange brackets. I think it finds it and then brings up a page for the serial number...
I was hoping someone might be able to help me with some technical issues I've been having with my machine. Now it's generally a consistent and overall good machine. But lately its been acting a little weird. Now since I've got it (number 2 owner)...
I have an issue after connecting linea classic av with electricity without water connection to the pump, there's a pop and then smoke coming out from the down side of the machine. Is it because without water connection to the pump or something else?
Hi,
a couple of weeks ago my lelit anna (8years old) started to leak, I changed the water tube that was fixed to the valve system and the problem was solved. Directly after, when using the steam pipe, steam leaked from the group head( also when warming up). I changed the gasket...
Have a Quick Mill Monza Deluxe that I started the descale process on using the option in the menu. Unfortunately, it just continues to pump water through. I stopped by turning the power off after filling the reservoir 4 times with water. Now when turning it back on, it wants to...
Van mijn heel oude Gaggia - 1960 /1970 - heb ik de boiler verwijderd en schoongemaakt. De afdichting van het deksel was een ring van asbest. Die is in stukken gebroken en niet meer te gebruiken. Wil ik ook niet. Mijn vraag is welk dichtingsmateriaal ik hiervoor het beste kan...
Hello everyone,
i was only able to find the following thread with somewhat related info but unfortunately it didn't help me much
Replacement Mater XP110 pressurestat
Pressurestat stopped working on my Vibiemme Junior HX few months ago ( i bought machine brand new back in...