Well, yes... it has... but I don't understand why...

I am doing a frame off restoration of an old Astoria 2 group machine and it has the normal dual pressure gauge. I am reassembling the machine, and ran it a bit to check for leaks and test the electronics. And I noticed that...

Hello everyone,

I've been having an issue recently where the brew switch (activated by the brew lever cam) is getting jammed in the on position.

I'm not sure exactly whats going on as I've never been able to recreate it. However, when it does happen its pretty easy to undo,...

Hi

I have an Sage Oracle Touch which has started leaking at the bottom left. After reading and watching videos, I thought it was o-rings from the boiler, but after opening up everything looks fine, except for this hose on the photo. It is sticky and wet on the outside, and I...

We recently bought an old Pasquini Livia 90 and it turned out needed some attention.

I replaced the pump and it worked perfectly, but when I left the machine on, it shut off after a few hours, with only the power light on -- in case you're wondering it was not the water level....

Hi dear all,
I got this beautiful Baby but it does leak water with the current gasket. I tried the one from Francesco didn't work for me at all. I tried the O-ring that was recommended in the previous topics from Danco #100. It does come out when I try to put the portafilter, it...

Hi, everyone

I have an issue after connecting linea classic av with electricity without water connection to the pump, there's a pop and then smoke coming out from the down side of the machine. Is it because without water connection to the pump or something else?

I will...

I was given a Casadio Unidici A1 machine (build date December 2017) that has something wrong with it by a local bar manager I'm good friends with. Instead of fixing the machine or figuring out what's wrong with it, one of their liquor distributors just give them a new one.

I...

Hi, anyone have a Wiring Diagram Desired For Espresso Marzocco Linea 2 group, EE Circa 1999?

Thank you

Jim

Hello,

I have a Pavoni with the 4-prong heating element with no thermostat. The original brass heating element stopped working, so I recently replaced all the wires, which did not fix the issue with the original brass heating element, and so I purchased a 4-prong new heating...

Hello fellow coffee lovers.

I was hoping someone might be able to help me with some technical issues I've been having with my machine. Now it's generally a consistent and overall good machine. But lately its been acting a little weird. Now since I've got it (number 2 owner)...