Hi all, I recently purchased a PID Control Retrofit KIT for Rancilio Silvia from Auber. This kit will work on my Faema Family but I'm having difficulty determining where to connect the Auber power supply (VIA SSR). I have been unable to locate a Faema Family wiring schematic....

I have a hard to find gauge and wanted to know if it can be rebuilt. I know it might be expensive and time consuming but I just want to know if it can even be done. My pump pressure gauge is stuck at 7 bar. Is there a method for cleaning one? I know I can just go get a new one...

Greetings! I have successfully performed maintenance on my E61 grouphead once before. I have a rocket appartamento.

The machine is five years old, so I decided to get a generic set of replacement parts from blue-star-coffee for the E61, and set about replacing the old parts on...

Hi guys, reaching out here because I really need some input regarding how to troubleshoot my GS/3

Long story short, I was making a small service on the machine and tightened my expansion valve too tight. Heated up the machine and realised to late that I had blown my manometer,...

Hi all,

After 4 solid years of use, my Dual Boiler has started to give me some grief. The machine is taking longer to build up pressure, and is not getting to 9 bar. When it started happening, I descaled and cleaned the machine and it worked well for another few weeks, but it...

I was watching Facebook Marketplace and Craigslist for a while as I knew I wanted to purchase and fix a broken espresso machine. I'd never worked on one before, but I have some knowledgeable friends and access to Google - what could go wrong!

I purchased a Wega Mini Nova for...

I had been looking at my local ads for a while waiting to pounce on a decent resto project. There are probably better machines out there, but this one is well documented on this site. And anything should be a workflow upgrade over my current Flair with an old DeLonghi EC680 for...

ive modded my machine with a lot of copper and plan to paint it matte black (its the brushed stainless atm) but the steam wand throws the whole color combo off and i saw that you can buy an elektra microcasa steam wand, which is copper, separately but i dont know if it can be...

Hello!
I recently purchased a used Brasilia Century as a winter project. I'm in a rut and hopefully can get some advise.

The machine has two power modes. First click, the pump and electronics turn on. Second click, the heating element should go on. On the first click,...

Hello! I was sent here from Reddit. I purchased a Rancilio Silvia last week. When I turned it on everything seemed to work fine. I flipped all the switches on, pump was work, water came out of the group head but as soon as I opened up the nozzle for steam, it tripped the GFCI...