Below is a collection of this forum's most popular topics. To nominate a thread for inclusion in this list, please post a reply to this message. Remember to check the Resources page for other references.
I recently acquired a Mahlkonig vta 6st. It has 120mm brew steel burrs. Does anyone have any experience with this grinder? How would it compare to something like the Lagom P01 - a modern day large flat burr grinder.
Any thoughts on what it could be? As a Mazzer fan I'm curious to find out. Probably a commercial grinder but would be great if it was a home-market GBW.
This *might* be a stupid question but I'm a new MC6 owner (bought used) and I cannot turn the grind dial finer than around -2 according to the left bean marker (the small one -- why is there another marker on the right?). Does that mean that the burrs are touching at this point?...
Hello everyone, I've had this grinder for about a year and a half now. I usually clean it every two months or so, grinding around 3 kg of coffee. Today, when I opened it for cleaning, I noticed a stain on the bottom burr, which you can see in the photos below. also uploaded the...
I've been looking for a hopper grinder for a bit. I ordered a E65S gbw but it showed up damaged. Kind of glad it did because I didn't care much for the build quality at the high price point. The finish on the portafilter prongs looked rough and there were more plastics than I...
So on IG Weber teased a video of a new bean feeder and a two-part cover that looks to replace the funnel. I've already asked if a retrofit will be available for existing Keys.
The bean feeder now has only one hole - which is good. I had found both holes open was too much for...
I recently purchased a 2012 HG One grinder from another HB member and I just started going through and cleaning it up. It had been sitting in storage for a while and while it is overall in great condition, I wanted to clean the burrs more thoroughly than a brush will do.
I was looking at the helor stance motor on option-os website and noticed the Coming Soon for the Lagom P64 Flat Burr Grinder. It appears to be a single dose grinder with adjustable RPM similar in design to monolith but keeping the asthetic of the HSM.