Below is a collection of this forum's most popular topics. To nominate a thread for inclusion in this list, please post a reply to this message. Remember to check the Resources page for other references.
I was looking at the helor stance motor on option-os website and noticed the Coming Soon for the Lagom P64 Flat Burr Grinder. It appears to be a single dose grinder with adjustable RPM similar in design to monolith but keeping the asthetic of the HSM.
Keen to hear people experience with 80mm burrs. While there's not as many options as 98mm or 64mm, there are still a few out there and it would be great to have an area where these experiences and knowledge of the burrs can be shared.
Any thoughts on what it could be? As a Mazzer fan I'm curious to find out. Probably a commercial grinder but would be great if it was a home-market GBW.
Hello everyone, I've had this grinder for about a year and a half now. I usually clean it every two months or so, grinding around 3 kg of coffee. Today, when I opened it for cleaning, I noticed a stain on the bottom burr, which you can see in the photos below. also uploaded the...
I recently acquired a Mahlkonig vta 6st. It has 120mm brew steel burrs. Does anyone have any experience with this grinder? How would it compare to something like the Lagom P01 - a modern day large flat burr grinder.
This *might* be a stupid question but I'm a new MC6 owner (bought used) and I cannot turn the grind dial finer than around -2 according to the left bean marker (the small one -- why is there another marker on the right?). Does that mean that the burrs are touching at this point?...
I've been looking for a hopper grinder for a bit. I ordered a E65S gbw but it showed up damaged. Kind of glad it did because I didn't care much for the build quality at the high price point. The finish on the portafilter prongs looked rough and there were more plastics than I...
So on IG Weber teased a video of a new bean feeder and a two-part cover that looks to replace the funnel. I've already asked if a retrofit will be available for existing Keys.
The bean feeder now has only one hole - which is good. I had found both holes open was too much for...