This was teased today on Option-O's Instagram. It looks massive! I'm really really hoping for a 120mm single doser!

29 minutes long;
- review of history for the first six minutes;
- 12:23-14:00 for why cone burrs should/must wobble, a.k.a., was James Hoffmann wrong in his Key review?

April 1, 2011 announcement of the Pharos: Pharos manual grinder by Orphan Espresso

I just ordered a Varia VS3 Gen 2, with Supernova burr. I am thinking about ordering an additional burr and am trying to decide which, if any.

The Varia will be an extended stay and/or automotive travel grinder for me, which will supplement my IZpresso JMax (my short stay/air...

I recently switched to SSP Cast burrs V2 silver and I cannot get decent shot to shot consistency out of . Shots can be 31 seconds and the next one 17 seconds, then 45 seconds. Every else staying the same.

I've read a lot about them before purchasing. I read about those having...

Hi everyone. I'm still here over-consuming content and over-analyzing in the hunt for my next grinder. :)

I've narrowed my choices down to either the Lucca Atom 75 or one of the more recent offerings with 64mm SSP HU's installed. I'm honestly perfectly happy with a...

As suspected by many with the release of the DF64v featuring variable RPM, a version of the DF83 has followed in the DF83v

From 300-1600rpm, verticle burrs with quite a different aesthetic. Should be interesting!

Hi,

I just got my Weber EG-1 today.
As a first try, I headed to dial in my espresso. I started with locking in my core burrs against each other to get to the absolute zero point. Then I adjusted as the Weber support rep suggested, by changing the grind size 4-6 full numbers...

I was looking at the helor stance motor on option-os website and noticed the Coming Soon for the Lagom P64 Flat Burr Grinder. It appears to be a single dose grinder with adjustable RPM similar in design to monolith but keeping the asthetic of the HSM.

I haven't been able to...

I have a Sculptor 078 on the way, and have an unopened never used Fellow Ode w SSPs, outside of a return window. I'm curious if anyone has tried both / has both and if they produce very different cups ?

I'm considering just keeping the Ode as well if I can't resell it for...

Out of the box issue with the DF54, unfortunately...

When adjusting the grind from 75 to 15 and running the motor it appears that the burrs are 'locked' or 'jammed' and not spinning freely. I can't turn the adjustment collar past 65 at which point the burrs become locked and...