Below is a collection of this forum's most popular topics. To nominate a thread for inclusion in this list, please post a reply to this message. Remember to check the Resources page for other references.
I have revised this post over the years with updates as I felt necessary. Those updates, in italics and dated, have been moved to the bottom of this post. Dan/HB said something about how it plays better with Google searches that way. So my revision notes are still here. Just at...
Hi everybody - 1st post here!
I read many times about a 5 seconds (approx) delay before coffee flows from the portafilter, but mine appears immediately. My workflow seems to be generally good - I use a Rocket Evoluzione, bottomless portafilter, 18g of ground coffee (dialled in...
Hi,
Our rimini coffee machine by futurmat's pressure seems to be quite high when brewing espresso (@ between 10-11 bar) and then looses pressure after a while or after a few coffees have been brewed. However hot water and steam wand don't seem to be effected. Doesn't anyone know...
TLDR: For the money it costs, the BZ13 is a well built, well performing machine; however, the steam wand isn't the greatest and the brew pressure is way too high from factory.
So, I picked one of these refurbished for work a couple weeks ago. Once I resolved the issues (loose...
Really insightful, thanks Jake! Makes sense - the needle is just limiting how quickly the headspace above the puck gets filled and of course then the system can build full pressure due to the resistance of the coffee. I've a couple of pondering q's to wrap my head around.
I've had my GS3 MP for a few years (2021) and recently brought it to a local shop for servicing / paddle maintenance. The service shop seems pretty serious they do a lot of commercial machines and they also had several other GS3 being serviced when I brought mine - I...
Hello everyone, I am writing to you from Lima, Perú. Last year I studied barista at an Hello everyone, I am writing to you from Lima, Peru. Last year I studied barista at an institute. Let's say that I still have very little experience in the coffee...
Had the issue of the fill pump never stopping when not pulling a shot today. I know this topic was brought up ( Breville Dual Boiler pump keeps running after ending shot ).
I believe for me that it was a case of a pocket of air stuck at the pump since it was not pulling any...