Below is a collection of this forum's most popular topics. To nominate a thread for inclusion in this list, please post a reply to this message. Remember to check the Resources page for other references.
I've just received my shiny new VBM Domobar Jr Hx Digital. Lovely machine, visually.
Pulled a few shots to get it basically dialed in, so far so good. I wonder, though, how to think about the brew temperature setting. Is this calibrated to the boiler or the group, does...
My 5 year old mini started failing to deliver water recently. Checked and solenoid cleaned by a service business.
Unfortunately the problem continued. It turns out if the machine has been on for more than an hour or more - on throwing the switch no click and no water. If I turn...
This has been teased for some time, but owners of IoT connected LMLM machines can now purchase a new Acaia Brew by Weight Lunar from LM and enjoy gravimetric dosing.
I own a Pasquini Livia 90 built in 2003 - restaured thanks to help in this forum!!! (I had to descale, restaure the Ulka pump, reset the high temperature sensor, clean the group head, replace the pressostat and the switch)
Hi everybody - 1st post here!
I read many times about a 5 seconds (approx) delay before coffee flows from the portafilter, but mine appears immediately. My workflow seems to be generally good - I use a Rocket Evoluzione, bottomless portafilter, 18g of ground coffee (dialled in...
Guys. After two years of constant fight with vibrations all over the machine, it's done. This time for good.
Last time I posted a solution for buzzing cuptray with magnets, which worked quite okay for a while, but forget magnets. Sometimes the cups would still buzz, not to...