Below is a collection of this forum's most popular topics. To nominate a thread for inclusion in this list, please post a reply to this message. Remember to check the Resources page for other references.
Guys. After two years of constant fight with vibrations all over the machine, it's done. This time for good.
Last time I posted a solution for buzzing cuptray with magnets, which worked quite okay for a while, but forget magnets. Sometimes the cups would still buzz, not to...
This has been teased for some time, but owners of IoT connected LMLM machines can now purchase a new Acaia Brew by Weight Lunar from LM and enjoy gravimetric dosing.
Hi everybody - 1st post here!
I read many times about a 5 seconds (approx) delay before coffee flows from the portafilter, but mine appears immediately. My workflow seems to be generally good - I use a Rocket Evoluzione, bottomless portafilter, 18g of ground coffee (dialled in...
Hi, I am quite new to coffee (3 months) and have been doing a bit of research around making espresso and whatnot. I have a Breville Bambino Plus and use a KINGrinder K2 to grind approximately 18gm of coffee for my shots. I'm noticing an extremely varied amount of espresso...
I have revised this post over the years with updates as I felt necessary. Those updates, in italics and dated, have been moved to the bottom of this post. Dan/HB said something about how it plays better with Google searches that way. So my revision notes are still here. Just at...
TLDR: For the money it costs, the BZ13 is a well built, well performing machine; however, the steam wand isn't the greatest and the brew pressure is way too high from factory.
So, I picked one of these refurbished for work a couple weeks ago. Once I resolved the issues (loose...
I've had my GS3 MP for a few years (2021) and recently brought it to a local shop for servicing / paddle maintenance. The service shop seems pretty serious they do a lot of commercial machines and they also had several other GS3 being serviced when I brought mine - I...
