Fellow Ode Gen 2 Burr Carrier Tolerance - Page 2

#11: Post by **Acavia** » January 8th, 2023, 10:58 pm

NVM, I see me initial question, in this post, was answered.

#12: Post by **unfiltered** » January 10th, 2023, 6:31 pm

Maybe you could try to shim the shaft I.e cut and wrap shim around it until you have a fit you're after.

#13: Post by **malling** » January 11th, 2023, 3:34 am

Acavia wrote:I had one briefly. The play in the auger is one of the reasons I returned it. Fellow stated the EK43 is same design. Does an EK43 have this much play?

Depends on generation the old had plenty play back when it was 1500 grinder, the new doesn't it's a much tighter more snug fit, with Titus carrier even more so. The ode is definitely more loose, but we are talking a 300 vs 3000 grinder now

#14: Post by **lsnandc** » March 30th, 2023, 2:32 am

Hi, can you share Nick's response?

#15: Post by **Cupig Coffee** » April 5th, 2023, 11:53 am

See post #72. I sent my Ode back for a refund because of this. Waiting on the TM 078 to ship now.

viewtopic.php?f=48&t=84755&e=1&view=unread#unread