Which grinders will take Ditting Sweet Lab burrs? - Page 2
-
- Posts: 17
- Joined: 3 years ago
Any tips on sourcing? I'd love to get a second hand Ditting and I'm trying to find any sources I can!
-
- Posts: 17
- Joined: 3 years ago
I'd also love info about a distributor who has available new 807s in stock and offers deals...
-
- Supporter ♡
- Posts: 178
- Joined: 17 years ago
I got my 804 used on ebay last year. I was seeing a lot of supply at the time.
-
- Posts: 689
- Joined: 4 years ago
I have a KR804 with Sweet burrs. What calibration do most use? I am half a setting, ~10mm along dial, from burr rub.
I only do pour over. I usually did 5 to 6 range, but have found myself going coarser lately. Did an 8 recently and it was good. Top go much coarser I would have to calibrate it coarser. I am thinking of doing 2.5 settings, for 2 settings coarser (new 7 would be old 5, etc.)
I only do pour over. I usually did 5 to 6 range, but have found myself going coarser lately. Did an 8 recently and it was good. Top go much coarser I would have to calibrate it coarser. I am thinking of doing 2.5 settings, for 2 settings coarser (new 7 would be old 5, etc.)