La Marzocco GS3 MP, Strada EP 1 group, Slayer, or Synesso MVP Hydra? - Page 3
- AssafL
- Posts: 2588
- Joined: 14 years ago
Congrats. Great choice. You will be very happy.
Scraping away (slowly) at the tyranny of biases and dogma.
- uscfroadie
- Supporter ♡
- Posts: 1156
- Joined: 16 years ago
That 15" figure is when measured to the tallest point - ground to the top of the grouphead - but that's only for the old MP (ie. the one without the manometer). Strada modded or newer conical valve versions with the manometer are about 2.5" taller, so 17.5" tallBrodie wrote:During my research of the same two machines, I saw the GS3 listed with a height of 15" (for the MP), and the Synesso listed at 21". I did see another number for the Synesso somewhere, at some point...but even that number was like 19" or 20".
Merle
-
- Supporter ♡
- Posts: 852
- Joined: 7 years ago
Daumier,DaumierS wrote:Just placed an order for GS MP this morning, It will be shipped to me this Friday. Can't wait for it!
Dave from LM Home was so helpful!
Congratulations on the new machine! If I was going to upgrade today from the Linea Mini, the GS3 MP would be my first choice.
Rocky
-
- Posts: 867
- Joined: 15 years ago
lots of good choices here, but surprised there isn't some interest in a LM linea with the sure shot and the new electronic paddle top option (which I know may not be ready yet)