Where can I get a precut teflon gasket for my Elektra Microcasa a Leva?
-
- Posts: 147
- Joined: 12 years ago
Where can I get a precut teflon gasket for my Mcal?
I have been trying to cut it from a teflon piece myself and I always fail
I have been trying to cut it from a teflon piece myself and I always fail
-
- Posts: 32
- Joined: 8 years ago
Try Shuk Engineering in New Plymouth, New Zealand they did one for me!
-
- Posts: 155
- Joined: 13 years ago
The teflon gasket on my '84 MCAL was made for the Sama Export. I got it from either the Good Coffee Company in Seattle or Orphan Espresso. A search on this site should yield a definitive answer about the fit.
-
- Posts: 17
- Joined: 9 years ago
http://www.lamacchinadelcaffe.com/en/ri ... cchio.html
Scroll down and find G8079. They will ship gaskets overseas. It may be worth while to contact them and ask for measurements to be sure it will fit.
I have not fitted this gasket myself, but I recall reading that someone else has done so. Good luck.
Scott
Scroll down and find G8079. They will ship gaskets overseas. It may be worth while to contact them and ask for measurements to be sure it will fit.
I have not fitted this gasket myself, but I recall reading that someone else has done so. Good luck.
Scott