I have read the great review of the Profitec Pro 800 Array/reviews/profitec-pro-800-review-t44660.html. This review gives a great description of how the dipper mechanism in the Pro 800 works, with prewetting then pre infusion. I have a Alex Leva and realise I am not totally sure...
I've always felt like the lever on my machine engages the pressure a little to late (meaning: when the lever is pointing couple of degrees above the horizon). There seems to be too little resistance the first couple of degrees. But this could of courses be normal.
Has any Alex Leva owner encountered a leaking valve that is used to steam the cup warmer? Right now I have a very slow constant leak through the cup steamer valve. I've tried to use steam to clear anything from the valve but the valve leak does not change. It looks like this is...
with the pandemic.. we've been drink a lot of coffee at home with our izzo alex leva. figured eventually i may need to replace the gasket later on and prefer not to get stuck waiting for gaskets, leadtime, etc. i would like to purchase the gaskets in advance and lube. any...
Something power related failed on my Leva this morning after turning it on. It was still warm, but no power to the switch light or PID, so it looks like if failed shortly after I turned it on.
I have not disassembled and diagnosed yet. Any ideas on what I should inspect or...
So I have rumagged around in the forum but found no definitive answer for the purpose of the valve or petcock peaking out of the bottom of the Leva. It looks like a boiler drain but when opened; nothing comes out, even fully pressurized to 1.1 bar. I have even removed the valve...
One year old, near flawless. Maybe some light wear on the cup tray, but not much. Works same as new, makes excellent espresso and steams milk well. Comes with original equipment plus: 54.70mm Cafelat tamper, Orphan Espresso dosing funnel, several extra filter baskets various...
Hi folks
I've been settling in with my new Leva. Lever Espresso Machine Gallery
A short learning curve, coming from an E61, but fun in the journey...loving the espresso!
My objective with this post is two-fold:
1. Document posts I found useful in my research and learning...
i've checked on HB and from previous post, there's been info about removing the inner spring on the Leva for different taste. I saw a post from Tom before that with both springs is about 11bars of pressure, where as if just outter spring only, it's about 8.5 bars of pressure....
I recently got Izzo Alex PID (2011). It is well used but in a working condition. Few days ago I turned it on and PID didn't turn on (but power switch lighted up), after few seconds of silence, the water regulator clicked loudly and started to buzz. I tried to start the...