- Page 2: mazzer major carrier

Searched query: +mazzer +major +carrier

by AndyPanda
April 9th, 2021, 3:22 pm
Forum: Grinders
Replies: 1
Views: 425

Very old Mazzer Major - single dose mods

... I'd post some pictures of the way I've been enjoying my very old Mazzer Major for the past several years. This must be one of the first Mazzer grinders ever imported ...
by nisb
March 5th, 2021, 4:22 am
Forum: Grinders
Replies: 0
Views: 121

Mazzer Major issues

I've bought an older Major for single dosing, but are experiencing some peculiarities -Narrow espresso range: ... '4', +/- only 1mm of adjustment -After taking off and replacing the upper burr carrier, the burrs will lightly touch at '4' but if tightened as far as it goes ('2.7') ...
Advertisement
by cdo
March 4th, 2021, 10:45 pm
Forum: Grinders
Replies: 4
Views: 378

Do all 83mm burr sizes fit ?

I had similar questions, the answer is unfortunately no they do not all fit. I purchased a set of Mazzer T151a burrs (Major Burrs) for my F6 and found out that the sizing is not the same. I ended up making it work by sanding them slightly after a couple hours of work but it would be easier to just
by blondica73
January 2nd, 2021, 11:44 am
Forum: Buying Advice
Replies: 37
Views: 2840

Mahlkonig EK43S burr options

Much appreciate your feedback
by bettysnephew
January 2nd, 2021, 11:29 am
Forum: Buying Advice
Replies: 37
Views: 2840

Mahlkonig EK43S burr options

... with the taste of my espresso. It was a massive Improvement over the Mazzer Major Electronic I had been using previously. When the grind is the same as my Kafatek Flat ...
by redbone
December 17th, 2020, 8:06 am
Forum: Repairs, Restorations & Mods
Replies: 0
Views: 63

Torque specs for grinder carrier.

Is there any official ratings on torque specs for main bolt of lower burr carrier. Currently have a Mazzer Major E and do not want to under or over torque burr carrier
by Marcelnl
November 20th, 2020, 3:10 am
Forum: Repairs, Restorations & Mods
Replies: 31
Views: 976

Mazzer Super Jolly conundrum

this is what it should look like, I can also not imagine that the different lower burr carriers are the source of your issues. {link} If anything using the wrong burr carrier might make the grinder a bit more prone to getting stuck. That trick using a bar with holes ...
by LObin
November 18th, 2020, 5:48 pm
Forum: Repairs, Restorations & Mods
Replies: 31
Views: 976

Mazzer Super Jolly conundrum

... the burrs per Jake's suggestion first. If I realize that it's an impossible task, I'll reach out to a local machine shop and get that lower burr carrier straightened
by LObin
November 15th, 2020, 12:19 pm
Forum: Repairs, Restorations & Mods
Replies: 31
Views: 976

Mazzer Super Jolly conundrum

I'm having some Major problems with my Super Jolly. Alright alright. Cheesy I know. Sorry. Here's the story: Bought this unit for $50 last winter. Plugged it quickly. Motor sounded just fine. Great deal. Home I went. Then... I realized ...
by zefkir
November 7th, 2020, 5:17 pm
Forum: Grinders
Replies: 34
Views: 6209

Eureka Drogheria MCD4 85

That's a huge grinding surface, I'm guessing that the central hole is much smaller than the ones in the Mazzer Major from the picture. And while it's smaller than the 98 mm EK burrs, it looks that the surface areas might be a bit closer than the diameter indicate