I was just joking on the speed. Now that I think about it, your time sound about right

Hope you are enjoying your new grinder! But 10000rpm and 10s? Just to set the record straight: the "Sette" runs at 650 rpm and (in my kitchen) grinds an espresso dose in 4-5s

... 70RPM. It takes about a minute to grind 16g. My previous grinder, a Baratza Sette 270Wi sounded like it ground at 10,000RPM. It would grind 16g in about 10 seconds. I'm ...

I read through a thread here about going back to a hopper style grinder because singe dose was too much work. I'm going in the opposite direction. My first grinder was a huge machine that you used to find in grocery stores to grind a pound of coffee. I used it for drip coffee. When I got into

I've done a few days of shots now. I turn the valve a half turn for the pre-infusion. That takes about 20 seconds. I then do another full turn, which is almost full open. The pressure goes up to 7.5-8.5 bars. When I get to around 20g in the cup, I close the valve a half a turn. I stop

... Coffee so I'll have a lot more control when I install it.I have a Baratza Sette 270wi so conical burrs.I roast to full city. My blends include 300g Brazil and 300g of ...

Thank you all for your useful replies. First experiments with my budget combo. After several attemps, even I am still far from a "perfect" one, I was able to get a reasonably good shots. I am using a Giamaica Caffè 100% arabica especially made for Cafè Stern in Paris, where paradoxically (living in ...

I want to specify that I am an absolute beginner here, for years I used a Nespresso machine then abandoned as I didn't like the aluminium of the capsules coming in contact with the hot water/coffee, then I had a deLonghi Magnifica S for a couple of years and recently I got a good deal for a Sage/Bre...

... and it's great to see you delving into the world of home brewing. Considering your budget and preferences, the Gaggia Classic Pro paired with a Baratza grinder is a solid choice for a versatile setup. While pricier grinders may offer finer adjustments and consistency, a mid-range grinder like ...

Put a new motor, outer-burr and gearbox assembly into the existing body. {link}