Search found 1261 matches
- April 15th, 2024, 11:44 pm
- Forum: Coffees
- Replies: 3
- Views: 330
Favorite Fruit Forward Coffees Recommendations
Little strong fruit to be had these days. Last good coffee was Israel Degafa from Compass. I just ordered 2 more lbs, but folks said the later roasts weren't quite as amazing. The long thread here details what is going on with lack of fruit bombs including a link to a long piece about Ethiopian coff...
- April 14th, 2024, 4:07 pm
- Forum: Knockbox
- Replies: 25
- Views: 697
Caffeine break
I've quit caffeine many times, fortunately keeping my equipment in storage. I find it takes a few months to really get 100% over it. I do think I'm more patient and there is less background anxiety when I'm off of it, but it's not horrible if I limit myself to two drinks a day, and none after 1pm.
- April 12th, 2024, 6:16 pm
- Forum: Grinders
- Replies: 49
- Views: 6409
La Marzocco Swan grinder released
The straight through design should reduce rentention to just what's in the burrs themselves, which would be roughly half or less of any grinder with the same burrs. A mazzer robur with the same burrs needed a full shot and a half or two when I used them in a cafe to be reliably at a new grind setting.
- April 8th, 2024, 4:25 pm
- Forum: Grinders
- Replies: 49
- Views: 6409
La Marzocco Swan grinder released
Looks like titan conicals with a straight through design and a static charge eliminator. Strong contender for a shop espresso grinder. Seems to be grind by rotations of the burrs and not weight?
- April 8th, 2024, 3:12 am
- Forum: Tips and Techniques
- Replies: 3
- Views: 193
Can I perform a Fellini shot GS3 MP ?
Resetting a lever several times will do a few things each time. 1) Remove all pressure and create a vacuum while the piston goes up, 2) re-preinfuse at line pressure for a plumbed in lever with boiler temp water (raising brew water temp on a traditional dipper lever), 3) recreate mostly the same pre...
- March 28th, 2024, 12:09 pm
- Forum: Grinders
- Replies: 1
- Views: 109
Any experiences with Mahlkonig VTA 6ST?
I have a few threads about the 120mm ditting burrs. From the SSP guy, he says he was impressed with the VTA 120mm burrs and less so with the 1203 burrs. I have a 1203 with stock burrs which I installed NOS. They are similar to a ditting 804 machined but I think a bit less unimodal. Personally I find
- March 27th, 2024, 12:33 pm
- Forum: Buying Advice
- Replies: 4
- Views: 158
Mazzer Robur S vs Mahlkonig E80S GBW
I used the classic robur s in cafes. Always off by a bit. We used fast scales and a little dosing cup to scoop out over doses for every shot. A gbw option is overdue. Personally I'd modify one to be gbw for a cafe. Mazzer grinders will never leave you stranded. Mahlkonigs I've used were great but
- March 19th, 2024, 9:10 pm
- Forum: Repairs, Restorations & Mods
- Replies: 4
- Views: 92
La Marzocco GB5 no water flow at group head
Brew solenoids would be the first thing I would check. A bad flow meter won't stop water, just cause a flow alarm
- March 19th, 2024, 12:31 pm
- Forum: Coffees
- Replies: 140
- Views: 10910
Blueberry (or any berry) bomb coffee recommendations?
Just got my two pounds. Certified blueberry taste. Very natural-y, almost anaerobic tasting. Thank you so much. Edit: this coffee " Israel Degafa, Wush Wush Natural " {link}
- March 15th, 2024, 3:22 am
- Forum: Espresso Machines
- Replies: 5
- Views: 161
La Marzocco GS3 Tea/Hot Water Dripping - Removing Solenoid?
I use a proper wrench on the stainless part and an adjustable big guy on the brass part. You can keep everything on the machine and not mess with those tiny bolts or brass fittings if you can hold the body solidly while you unscrew the stainless part. Go ahead and order the new solenoid plunger (or