Search found 1748 matches
- March 19th, 2024, 3:52 am
- Forum: Lever Espresso Machines
- Replies: 50
- Views: 2429
ACS Vostok 1 group wear
Here' s the one I had. {image}
- March 18th, 2024, 9:37 am
- Forum: Lever Espresso Machines
- Replies: 50
- Views: 2429
ACS Vostok 1 group wear
Some levers have a rubber stop at the end of the travel. But I don't think a little wear at that spot can be avoided. The LSM group that I used over a 10 year time period still looked brand new besides those little spots
- March 18th, 2024, 9:30 am
- Forum: Lever Espresso Machines
- Replies: 50
- Views: 2429
ACS Vostok 1 group wear
Normal.It's a machine.When you use it things will show signs of usage
- February 19th, 2024, 2:21 pm
- Forum: Lever Espresso Machines
- Replies: 28
- Views: 1608
Comparing the Faema President, Urania, and Lambro
My Lambro has the short(56 mm) alu part of the group. Only have seen one other Lambro was that group. Still don't t know if it was produced like this or if the group has been changed. {image}
- February 8th, 2024, 7:19 am
- Forum: Lever Espresso Machines
- Replies: 12
- Views: 408
Olympia Cremina 2019 - Steam wand rotates and sputters at fastening nut
Sorry.Somebody already mentioned the rivet option
- February 7th, 2024, 10:59 am
- Forum: Lever Espresso Machines
- Replies: 12
- Views: 408
Olympia Cremina 2019 - Steam wand rotates and sputters at fastening nut
If the tip can be taken off putting two or three rivets on the tapered part might be a solution.Have to be the exact diameter so they keep in place above the tapered part
- February 5th, 2024, 7:43 am
- Forum: Lever Espresso Machines
- Replies: 12
- Views: 408
Olympia Cremina 2019 - Steam wand rotates and sputters at fastening nut
You could try and put some tape at the the edge where the arm thickens(arrow). Maybe that way the nut is able to tighten the rod more. A mm thick layer. {image} Like this. {image} {image}
- January 12th, 2024, 10:26 am
- Forum: Lever Espresso Machines
- Replies: 56
- Views: 4893
New review of Nurri L-Type Leva by Lance Hedrick
Temperature or pressure.Makes no difference
- January 12th, 2024, 10:09 am
- Forum: Lever Espresso Machines
- Replies: 56
- Views: 4893
New review of Nurri L-Type Leva by Lance Hedrick
I'm not talking about efficiency. Also the Nurri costs 5000 dollars plus. Who wants to do 9 bar shots with a lever anyways.Besides a Strega can do that too so nothing special Temperature control exists in abundance on any decent machine. Declining temperature is one aspect that makes a lever special...
- January 12th, 2024, 8:30 am
- Forum: Lever Espresso Machines
- Replies: 56
- Views: 4893
New review of Nurri L-Type Leva by Lance Hedrick
No I haven't.What's so special? Not many around here