Search found 303 matches
- July 15th, 2022, 2:51 pm
- Forum: Repairs, Restorations & Mods
- Replies: 14
- Views: 423
Brass Fittings for Pasquini Livia 90
Good to hear. And that is why it is good to have at least two espresso machines..... one to use, and one to clean and tinker on, and modify
- July 14th, 2022, 5:31 pm
- Forum: Repairs, Restorations & Mods
- Replies: 14
- Views: 423
Brass Fittings for Pasquini Livia 90
Hey! I just heard back from Pasquini, and they DO have that part "Exchanger-group solenoid valve hose. It costs $10.50. To order it, you have to send them a note in the instructions form of the order. Like for instance, I am ordering quite a few things that are on their website parts page, and after I
- July 12th, 2022, 8:42 pm
- Forum: Repairs, Restorations & Mods
- Replies: 9
- Views: 378
Livia's Lover: A Relay-table question?
Yeah, I totally agree, and will stick with the stock relay for now. Sending the control box off to Boytindustries for repair. Yes there are two different control boxes, one for the semi auto machines and a more complicated one for the Automatic machine. The 4 Livia 90 machines on my work bench are a...
- July 12th, 2022, 8:17 pm
- Forum: Repairs, Restorations & Mods
- Replies: 14
- Views: 423
Brass Fittings for Pasquini Livia 90
I checked out that link, and the part is O/S..... maybe you got the last one? I am still waiting to see if Pasquini has that part in stock, if not I am going to make it. I have already sweated off the nipples of my old cracked exchanger-group solenoid pipe/tube, and I have the 6mm copper pipe
- July 11th, 2022, 2:15 pm
- Forum: Repairs, Restorations & Mods
- Replies: 14
- Views: 423
Brass Fittings for Pasquini Livia 90
Hey Wendel, I just called Pasquini, and talked to a nice guy in parts and service. He seemed to think they had that part, 5162185LL-Exchanger-group solenoid valve hose. He said they had a lot of emails to answer, especially since they aren't open on Fridays, so last week was a really short week with...
- July 10th, 2022, 9:50 pm
- Forum: Repairs, Restorations & Mods
- Replies: 9
- Views: 378
Livia's Lover: A Relay-table question?
So, I went for it....I tried installing a solid state relay in my '96 Pasquini Livia, and I am a FN idiot. I really should have studied the wiring diagram (I can study it and it still doesn't make much sense) a lot more and asked A LOT more questions before I wired in a non-stock relay. I
- July 10th, 2022, 8:57 pm
- Forum: Repairs, Restorations & Mods
- Replies: 14
- Views: 423
Brass Fittings for Pasquini Livia 90
Hey Wendel, I had the same thing happen to that part (5162185LL ="exchanger -group solenoid valve hose". Ref. Table 3 up to 10/01/06 DE-PM) on an early Livia 90 I am trying to restore. I contacted Pasquini via their "Contact Us" page on Thursday, and they said they would check. Hopefully I will hear...
- June 29th, 2022, 6:04 pm
- Forum: Espresso Machines
- Replies: 1
- Views: 532
Olympia Maximatic Group (49mm) Slightly Too Small for Baskets
Hi, Yes I had a problem with some baskets that would fit my Olympia Cremina(49mm group head) but not my Pasquini Livietta(Olympia Maximatic with Pasquini badging) 49mm group head. Like you say it looks like the rim of the basket just is a little too large in diameter, and it won't go into the group ...
- June 27th, 2022, 9:47 pm
- Forum: Repairs, Restorations & Mods
- Replies: 3
- Views: 498
Breville 980XL Oracle Water / Pump Problem - A little help please!
Hi: I don't know how big the brew chamber capacity is for your brew head, but it sounds like maybe it is just not full with water when you hit the shot button? like maybe some of the water has evaporated by heat during the heating up the machine? do you run water through the group head
- June 27th, 2022, 9:41 pm
- Forum: Repairs, Restorations & Mods
- Replies: 10
- Views: 735
Pasquini Livia 90 - Not keeping steam pressure
A little correction or clarification.... To get the brake hose onto my steam arm, I have to remove my steam tip. On some machines I can fit the brake hose over the steam tip. The other thing I forgot to mention in my "ramble" "The Pasquini Papers".....is, when my boiler element is heating, and the l...