Search found 850 matches
- April 15th, 2024, 2:38 am
- Forum: Coffee Roasting
- Replies: 6
- Views: 117
Modbus / Fuji PXG4 PID SV error
We have legacy builds of all the recent Artisan versions which run fine on Big Sur
- April 15th, 2024, 1:36 am
- Forum: Coffee Roasting
- Replies: 6
- Views: 117
Modbus / Fuji PXG4 PID SV error
Any reason you are using an outdated Artisan. Artisan v2.4.2 was released in 10/2022. 9 releases later there is the latest Artisan v2.10.4 available since 3/2024
- April 12th, 2024, 2:59 am
- Forum: Coffee Roasting
- Replies: 17
- Views: 490
High idle noise on thermocouples
I am not aware of ANY device sending timestamps the measurement were taken along the data. That would of course be very helpful! Thus many are using a network setup, but usually with just minimal delay. Still having the time the measurement was taken would be productive. Note that taking a measureme...
- April 11th, 2024, 1:55 am
- Forum: Coffee Roasting
- Replies: 17
- Views: 490
High idle noise on thermocouples
Why didn't you report your findings back to the Artian project, maybe including a PR fixing the issue? On reading the code, I cannot confirm your finding, not even for the first Artisan release supporting WebSockets (v2.4.2), at least not for the first two channels, ET/BT. Artisan takes the time of ...
- March 22nd, 2024, 5:49 am
- Forum: Coffee Roasting
- Replies: 2
- Views: 133
Artisan - Probat P12 websocket disconnected
Matteo, why not ask on the "Artisan Forum" for support if you have an issue with Artisan? The message indicates that Artisan is not able to communicate with the machine at all. Most likely the IP address of the machine has changed. Verify that the IP address in your WebSocket tab under HOST ist the ...
- March 3rd, 2024, 2:02 am
- Forum: Coffee Roasting
- Replies: 39
- Views: 1385
Artisan for IKAWA Home and Pro
A very good description of the IKAWA setup and how to extend it with further channels. Thanks for sharing! Marko
- February 10th, 2024, 12:38 pm
- Forum: Coffee Roasting
- Replies: 51
- Views: 2587
Artisan+ home-roasters use discussion
Hm. What exactly are you trying to achieve? Are you importing beans data from a supported supplier? If you did not specify a store, but added an amount you will not be able to confirm this input. The store line will be marked red indicating that you need to make a choice here. You never have to star...
- January 31st, 2024, 11:19 am
- Forum: Coffee Roasting
- Replies: 39
- Views: 1385
- January 30th, 2024, 3:49 pm
- Forum: Coffee Roasting
- Replies: 39
- Views: 1385
Artisan for IKAWA Home and Pro
It does. Just Artisan is not recording it, yet. Should I add that? Note that you could let Artisan compute the RoR from the humidity signal as well using a corresponding "Symbolic Formula"
- January 30th, 2024, 9:21 am
- Forum: Coffee Roasting
- Replies: 39
- Views: 1385
Artisan for IKAWA Home and Pro
Matt is using the current "continuous build of Artisan" which adds better IKAWA support, incl. recording of BT, moisture and ambient pressure for the PRO X machine