Search found 104 matches
- July 16th, 2017, 8:33 am
- Forum: Lever Espresso Machines
- Replies: 7
- Views: 572
Elektra Microcasa a Leva optimised cappuccino
I think what rplavis describes is the classic cappuccino - 1/3 espresso, 1/3 steamed milk, 1/3 foam. What Drgary describes is the classic latte - microfoamed milk mixed evenly in with espresso. Both marvelous drinks, but different construction and drinking experiences. I like them both!
- June 17th, 2017, 11:10 pm
- Forum: Lever Espresso Machines
- Replies: 20
- Views: 1156
Faema Faemina 110v (third model ?)
Nice! These are terrific machines - enjoy yours
- June 10th, 2017, 8:39 pm
- Forum: Lever Espresso Machines
- Replies: 13
- Views: 279
Overpressure valve for Conti Prestina
Cafeparts has OPVs for Conti's - look at their boiler page. May not specifically be for the Prestina, but they give the measurements, thread specs, etc. The part I'm looking at is about $25.00
- June 5th, 2017, 11:30 am
- Forum: Lever Espresso Machines
- Replies: 9
- Views: 382
Conti Prestina redlined
My experience has been that this sort of behavior is usually due to a malfunctioning pressurestat. Haven't had it happen on the Prestina, but it has occurred with our Elektra. Did the safety valve engage?
- June 5th, 2017, 8:46 am
- Forum: Lever Espresso Machines
- Replies: 7
- Views: 407
Conti Prestina portafilter flange leak
I had a flange leak, as well. But mine definitely was due to the o-ring site! {image} I'm not sure whether it started life as an o-ring or a gasket, but a new 0-ring sealed things nicely
- May 31st, 2017, 11:31 am
- Forum: Lever Espresso Machines
- Replies: 19
- Views: 1240
Eterna Mignonette
Great progress on a fascinating project!
- May 26th, 2017, 2:41 pm
- Forum: Buying Advice
- Replies: 3
- Views: 174
Source for Conti Prestina piston seals?
I need to replace the piston seals in my Prestina. Allann Bros. tells me that they no longer carry Conti parts They referred me to SproParts.com, but they do not appear to be familiar with the lever machines. Does anyone have other suggestions for USA or Canadian suppliers? Or the correct
- May 22nd, 2017, 9:12 am
- Forum: Lever Espresso Machines
- Replies: 6
- Views: 539
Dallas Home Lever Users
I have a couple of Creminas, a Faema Emmina and a Conti Prestina here in Fort Worth. No new-ish levers, though. Sue
- October 14th, 2016, 8:50 pm
- Forum: Grinders
- Replies: 74
- Views: 8602
Kafatek Monolith Flat User Experience
I've had my Monolith Flat for a little over a week and am very pleased! I chose the flat because: - I already have two 68mm conical grinders - my Conti Prestina lever is terrific at layered, nuanced shots. The build is impressive and it's very straightforward to
- September 30th, 2016, 7:33 pm
- Forum: Grinders
- Replies: 1461
- Views: 218405
Hand (grinder) Jive - a photo essay
Well done!!!