Search found 26 matches
- December 15th, 2023, 1:12 pm
- Forum: Buying Advice
- Replies: 9
- Views: 462
Buying Niche Zero in USA
what scenarios would they waive shipping?
- November 2nd, 2023, 7:41 pm
- Forum: Espresso Machines
- Replies: 0
- Views: 117
Breville Dual Boiler Error 08: Coffee Water Flow Failure
Hi, I'm considering a used BDB that has maxed out (I'm assuming) the Error 08: Coffee Water Flow Failure at 99 times. It has no other logged faults. I looked through this forum and google and really only found this topic on it: {link}. I'm a little confused as it seems to be running ok other thana s...
- October 6th, 2023, 5:29 pm
- Forum: Grinders
- Replies: 18
- Views: 939
Burr Rub Normal?
Way better shot times. I'm now 4 clicks away from burr touch for a 19g dose with 38g out in 25 seconds
- October 3rd, 2023, 1:23 pm
- Forum: Grinders
- Replies: 18
- Views: 939
Burr Rub Normal?
I've had it flipped for a few years now actually. When I aligned yesterday I was tempted to re-flip it back because of how drastic my shot changed. Will post an updated alignment experience on Friday
- October 3rd, 2023, 2:26 am
- Forum: Grinders
- Replies: 18
- Views: 939
Burr Rub Normal?
Good point! Ended up doing the alignment using the clamp method and did a clean wipe on my first try. Highly recommend the clamp method as its also super affordable and feels almost fool proof
- October 2nd, 2023, 3:08 pm
- Forum: Grinders
- Replies: 18
- Views: 939
Burr Rub Normal?
Side note, but I noticed that my first shot after cleaning out the grinder was completely different than any shot prior even at the same grind setting. It had that iconic money shot of espresso building on the portafilter and forming into a single gentle stream. My flow rates before were extremely f...
- October 2nd, 2023, 1:27 pm
- Forum: Grinders
- Replies: 18
- Views: 939
Burr Rub Normal?
whoops, here's one with both photos: {image} {image}
- October 2nd, 2023, 4:16 am
- Forum: Grinders
- Replies: 18
- Views: 939
Burr Rub Normal?
Great point. I spent some time deep cleaning the burrs and redid the test. Again would appreciate thoughts! {image}
- October 2nd, 2023, 2:01 am
- Forum: Grinders
- Replies: 18
- Views: 939
Burr Rub Normal?
I did a quick ink test on my Vario to double check my alignment. Would appreciate your thoughts on how well aligned this is. {image} {image}
- September 29th, 2023, 6:06 pm
- Forum: Grinders
- Replies: 18
- Views: 939
Burr Rub Normal?
I do have the Forte-fied Vario with the metal interiors, though I can 100% believe my burrs are misaligned