Hello, I haven't posted for a while in this topic. But I recently made this post in another topic about connecting to my LMLM via the home assistant home automation platform: "La Marzocco Micra/Mini/GS3 App firmware and gateway updates" An overview of the parameters is shows and is able to control: ...

I don't know if this is something that a lot of people are aware off, but there is an integration with the Home Assistant home automation platform for LM machines. After the recent updates it sadly stoped working, but after a fork was made of the original integration which has been developed further...

I have the tray as well and used it with my old Lunar. The 2021 model has the exact same outer dimensions and fits just fine. So if the LM model is a regular Lunar with special firmware as LM says it should be no problem

Well, I replaced my original Acaia Lunar with the 2021 model after I accidentily dropped it too many times. So if my clumsiness in handling scales continues I'll probably replace it with this version eventually

It's the grey part connected to the left side of the Y-splitter. As advertised on. the Dutch website where I bought it: {link} Together with a 'aquastop reset' extension for easy resetting witout having to completely remove the aquastop to reset it as normally the reset pin is in the middle of the w...

My DIY at home so far: {image} Brita Purity C50 filter connected with 3/8 inch fittings. John Guest Speedfit line to the kitchen cabinet where the dishwasher tap is. {image} Splitter with built in check valves to prevent dishwasher water from ever flowing into the espresso machine line and an aquast...

I went for John Guest speedfit + plastic line instead because I needed about 6 metres in length, hard to find as braided line

Well, I just ordered the water tubing and a filter kit: I was already considering it after moving to new house where reaching the espresso machine with a fresh water line is much less difficult... but this new FW with it's line pressure preinfusion option sealed the deal. It's time to finaly plumb t...

EtzMax owner here as well. And... I owned a Sette 270W before! So I know the 'jet taking off' experience . The EtzMax is actually a very quiet grinder. Completely the opposite from the Sette. In fact, I owned an Eureka Atom in between these grinders which was marketed for it's 'silence' which was so...

Hey Maki, actually I first used the etzMAX without WDT. But the results were clearly a bit less good than with my Kinu M47. So I tried WDT as well as dosing in a cup first and giving it a swirl. And WDT definitely yielded better results and more constant flow on the same level as the Kinu. Of