Search found 11 matches
- April 28th, 2023, 10:40 pm
- Forum: Lever Espresso Machines
- Replies: 17
- Views: 3203
Epoch: The Modular Manual Espresso Machine (Kickstarter)
First impressions on youtube (My Coffee Show). {video}
- April 28th, 2023, 4:50 am
- Forum: Lever Espresso Machines
- Replies: 17
- Views: 3203
Epoch: The Modular Manual Espresso Machine (Kickstarter)
Yet another manual espresso machine from kickstarter (but looks interesting). There are 2 versions. The lever version(like the newton brua with 51mm portafilter) and the hand crank version(like the rossa hc with 51mm portafilter). The usual portafilter would make it easier to brew multiple shots. {v...
- March 6th, 2021, 7:19 am
- Forum: Lever Espresso Machines
- Replies: 21
- Views: 1256
Londinium L1 pre-infusion channeling
Longer pre infusion under about 2-4[atms] would avoid channeling
- September 18th, 2017, 1:43 pm
- Forum: Lever Espresso Machines
- Replies: 211
- Views: 18860
New Lever is in the House...well, kinda...Portaspresso
Thank your responding. My needle valve is solid. I can brew espresso with mine. But it is unstable when stand mine upside down. And the valve knob looks ugly a little and this is annoying. I sent email to Ross with some pics. Thank you
- September 18th, 2017, 11:45 am
- Forum: Lever Espresso Machines
- Replies: 211
- Views: 18860
New Lever is in the House...well, kinda...Portaspresso
I purchased portaspresso tr (with pressure gauge) and received it today. The valve knob is twisted (tilted) so much. I attached the picture. Is this intended design or other owner's one is not tilted ? Help me with your information, portaspresso owner, please. {image} This tilt looks not to be cause...
- November 17th, 2016, 1:38 am
- Forum: Lever Espresso Machines
- Replies: 9
- Views: 2207
Cheap version of rossa portaspresso.
{link} Today I found a cheap version of portaspresso. It looks to be able to produce double shot, so would be good for portable
- June 17th, 2016, 4:12 pm
- Forum: Espresso Machines
- Replies: 228
- Views: 19046
EspressoForge - First Impressions
Impressive. The Forge is very impressive I think. I got some great ristretto doppio shots, brewing with - Full city roasted , 2 days aged , 15g beans. - Ground with LIDO-E 0.4 notches. - Preheat 1 time. - Pour hot water and immediately ramp up to 8bars and slope down
- June 12th, 2016, 9:22 pm
- Forum: Grinders
- Replies: 196
- Views: 25120
Orphan Espresso LIDO 3 first impressions
Uh huh. In my opinion, such individual unique informations would help other's coffee life, so I searched old articles, but I can't find any information. Please don't care about it, my searching skill might be lame
- June 12th, 2016, 9:09 pm
- Forum: Espresso Machines
- Replies: 228
- Views: 19046
EspressoForge - First Impressions
Thank you samuellaw178 !! "-0.5 (minus 0.5)" ? really ? I'll try that range( In my LIDO-E, It would be about -1.0 I think ... ). It seems to be some hard work to grind at that small range. I was worrying about too small range against the manual, but your information resolved my worry. My
- June 12th, 2016, 5:55 pm
- Forum: Espresso Machines
- Replies: 228
- Views: 19046
EspressoForge - First Impressions
Recently I received my espressoforge v2.1 and make some cups of espresso with it everyday. I grind city roasted coffee beans with LIDO-E. My question is my LIDO-E is OK or not. In the LIDO-E manual, espresso setting range is 4-8 from zero, but 4th notch seems to be too loose for my espressoforge. Ab...