Hello All! It's been awhile as life really tends to keep us away from our true joys! Anyway, here is a video of some interesting lever machines I've talked about; The Ventus and the Triangulum. There is also more information on these machines here on Home Barista from the past! {video}

Hello all! I recently came into 6 free La Marzocco Silicone gaskets. I just wanted to pass them along if anyone needed them! As I don't own a LM machine. They appear to be 7mm conical silicone group gaskets If you would like one (one per person please!) You can send me a self addressed envelope

You might be slightly over doing it with the lube. Really there is no reason for lubing the ball joint itself as Teflon is self lubricating for the most part. More {link} That said, you should put a film around any o-rings in the joint. A dab will do you. Best, Jorian

I'm glad your issue was resolved! Just as a note, line pressure is definitely odd sometimes. In your case, the valve definitely needed replacing, but I just wanted to share this thought: If you still have a problem with the fill in the future, try reversing the the fill valve direction. That is swap...

Yes, a screw extractor would work if you can't grab the stub. I've used them with success. Try a set similar to this: {link} I'd advise taking the collar off and putting it in a vice (With padding to protect it from the jaws). Then go slow and take your time. Also, some penetrating oil might

Working for a whole sell roasting company. Our training department trains cafes to backflush with screen in

{image} {image}

Very cool!

I can't say that it is "ok" for brew water. But recently I blew an element. A 50/50 distilled vinegar and distilled water soak got my boiler clean. It's cheap and worth a try!

Completely agree with Tom. I have the same experience