Search found 3538 matches
- 4 hours ago
- Forum: Lever Espresso Machines
- Replies: 2
- Views: 70
Arthritis and the Argos boiler cap
Posting an image of the cap will help others visualize a solution the would be helpful for you
- 5 hours ago
- Forum: Grinders
- Replies: 57
- Views: 2736
Weber EG-1 noises on fine grind settings
This is all most unfortunate. I would defer judgement till much later. This is a small boutique manufacture, they should be given the benefit of the doubt, the time and space to figure out the solution to their problem. It's in all our best interest that small operations such as this survive and thr...
- 7 hours ago
- Forum: Repairs, Restorations & Mods
- Replies: 2
- Views: 49
Help with brew pressure on izzo espresso machine
Sounds like the bottom group valve for exhaust is not opening fully and functioning smoothly. This should be checked, verified and lubricated
- April 16th, 2024, 8:52 am
- Forum: Repairs, Restorations & Mods
- Replies: 3
- Views: 67
Izzo Alex Duetto 3 - pressure valve, need help !
Welcome to HB Rasmus I would suggest removing and cleaning the steam boiler water level probe. The likely cause of your problem is a defective steam boiler temperature probe. If you can, please post an image or video of the PID temperatures. It looks like you're direct plumbed based on the front pan...
- April 14th, 2024, 5:44 pm
- Forum: Repairs, Restorations & Mods
- Replies: 6
- Views: 104
Izzo Alex Duetto 3 - help with wet steam and low pressure
Yes, the red circled device is the fill probe. I would try that first and see what happens
- April 13th, 2024, 6:19 pm
- Forum: Repairs, Restorations & Mods
- Replies: 6
- Views: 104
Izzo Alex Duetto 3 - help with wet steam and low pressure
Step 1 - pull, photograph & clean steam boiler fill probe and take it from there
- April 12th, 2024, 5:32 pm
- Forum: Grinders
- Replies: 3
- Views: 180
Honing Burrs; Mahlkonig K30 Vario
It's not my process. I received these sanding discs from 'Analogue Coffee'. You can try to contact them here: {link} This thread was originally posted here: "The claim that perfect grinder alignment is insignificant" I have no idea why they split it to its own thread - without even any PM notificati...
- April 12th, 2024, 12:49 pm
- Forum: Buying Advice
- Replies: 28
- Views: 1497
Best grinder aesthetically for KDVW Speedster
Very interesting but those images are of PRE - 2020 Speedster!
- April 12th, 2024, 11:14 am
- Forum: Espresso Machines
- Replies: 6
- Views: 174
- April 12th, 2024, 10:54 am
- Forum: Espresso Machines
- Replies: 6
- Views: 174
First time taking of boiler and heating element of my lelit
Welcome to HB Nikos That's pretty amazing work! +1 for non-scaling water - all the time!