Search found 288 matches
- December 1st, 2022, 10:44 am
- Forum: Espresso Machines
- Replies: 2246
- Views: 221360
Lelit Bianca User Experience
Yeah, me too on the pre-infusion. I hold it around two bar or so until I see some drops and then push it to nine or ten then back it off towards the end
- December 1st, 2022, 8:39 am
- Forum: Espresso Machines
- Replies: 2246
- Views: 221360
Lelit Bianca User Experience
I've had my Bianca about two years and still use the paddle for each shot. Either dialling in a new roast, recreating a shot I'm happy with or just experimenting
- September 20th, 2022, 3:01 pm
- Forum: Espresso Machines
- Replies: 2246
- Views: 221360
Lelit Bianca User Experience
You don't need to remove the tank. You'll need to remove that top screw for the tank but the tank remains. Remove all the other screws and the top comes right off
- September 16th, 2022, 3:11 pm
- Forum: Espresso Machines
- Replies: 2246
- Views: 221360
Lelit Bianca User Experience
I had to replace my safety valve as my Bianca was doing the same thing. It's normal as it warms up but should stop. Mine would hiss and drip all the time. {link}
- August 10th, 2022, 12:24 pm
- Forum: Repairs, Restorations & Mods
- Replies: 2
- Views: 296
Correct drivers for Phidget 1048_0
Yes, I assumed because my Phidget was old it needed legacy drivers. Not the case I guess because I uninstalled the old one and installed the most recent drivers. Looks like it's up now. Thanks!
- August 10th, 2022, 7:46 am
- Forum: Repairs, Restorations & Mods
- Replies: 2
- Views: 296
Correct drivers for Phidget 1048_0
The laptop I've been using for several years with my Huky roaster finally died so I'll need to install Artisan along with the drivers for my ancient 1048_0 Phidget on the new Win 10 laptop. I'm looking at Phidgets and see the latest version is now 1048_2B. I wonder if the drivers would even work on ...
- November 19th, 2021, 9:02 am
- Forum: Espresso Machines
- Replies: 6
- Views: 1057
Small puddle of water under my Lelit Bianca
It was that Y fitting that goes to the drain tray. The plastic just rotted away however the other Y fitting looks OK. Bella Barista, here in the UK, said Lelit has since changed the material. Still plastic but it should last a lot longer. Think I'll replace both of them. Maybe look for a brass fitti...
- November 19th, 2021, 3:27 am
- Forum: Espresso Machines
- Replies: 6
- Views: 1057
Small puddle of water under my Lelit Bianca
Thanks, I'll do that
- November 19th, 2021, 1:44 am
- Forum: Espresso Machines
- Replies: 6
- Views: 1057
Small puddle of water under my Lelit Bianca
I have my Bianca on a smart switch which turns on in the morning before we get up. The past two mornings I've noticed a small puddle of water on the counter underneath on the right hand side. It doesn't appear to be a constant leak but something that happens during warm up. The machine stays on for ...
- August 2nd, 2021, 11:17 am
- Forum: Coffee Roasting
- Replies: 21
- Views: 1258
Artisan 2.4.6 released with Sweet Marias as our inaugural Sponsor
Is Artisan moving towards subscription? I must have missed that. I make regular contributions and have been using Artisan for several years with my Huky. I roast maybe two pounds about every other week so 99 Euros a year seems a little steep. edit: Maybe that's for the inventory service? If so that'...