Search found 399 matches
- May 23rd, 2023, 9:53 am
- Forum: Grinders
- Replies: 641
- Views: 49713
Announced: Niche Duo 83mm flat burr grinder
I emailed Niche about the reduced price. They offered a partial refund equal to the difference of the old price and the new price, £150
- April 29th, 2023, 2:38 pm
- Forum: Grinders
- Replies: 641
- Views: 49713
Announced: Niche Duo 83mm flat burr grinder
Generally, about the same as one would with a pour over. Maybe a bit coarser. Its an immersion brewer
- April 29th, 2023, 12:50 pm
- Forum: Grinders
- Replies: 641
- Views: 49713
Announced: Niche Duo 83mm flat burr grinder
When I travel, I take an aeropress with me. I expect I will pre-grind beans for the Aeropress before leaving the house. I'm expecting I will use the filter burrs for that
- April 28th, 2023, 7:23 pm
- Forum: Grinders
- Replies: 641
- Views: 49713
Announced: Niche Duo 83mm flat burr grinder
But would all surfaces of the burrs be rated equally in their contribution to the quality of the grind? Or would the outer edges be more important than the inner surfaces?
- April 20th, 2023, 2:27 pm
- Forum: Grinders
- Replies: 641
- Views: 49713
Announced: Niche Duo 83mm flat burr grinder
I asked this same question earlier in the thread. Some responses were unhelpful. Some helpful responses pointed to a thread from the late 2010s. I think its generally going to be the case where we will just have to wait for the Duo to be released to make a comparison
- April 11th, 2023, 1:50 pm
- Forum: Grinders
- Replies: 641
- Views: 49713
Announced: Niche Duo 83mm flat burr grinder
Thanks! Looks like it's the perfect answer to my question
- April 10th, 2023, 4:11 pm
- Forum: Grinders
- Replies: 641
- Views: 49713
Announced: Niche Duo 83mm flat burr grinder
So... low RPM would be good for the mazzer major burrs but not for the SSP HU burrs?
- April 9th, 2023, 8:27 pm
- Forum: Grinders
- Replies: 641
- Views: 49713
Announced: Niche Duo 83mm flat burr grinder
Thats what RANGE would mean... within a minimum and maximum value, not a single specific value. I was hoping some people might have relevant experience with variable speed grinders and how the slower speeds compared to the faster speeds with respect to the taste
- April 9th, 2023, 7:33 pm
- Forum: Grinders
- Replies: 641
- Views: 49713
Announced: Niche Duo 83mm flat burr grinder
Seriously... dude... they are all in the 1500 rpm range, i.e. around that speed give or take. And plenty of other flat burr grinders spin also in that range, i.e. around that speed give or take. But still not a relevant response to the question of how the Duo's expected 530 rpm speed might affect th...
- April 9th, 2023, 6:56 pm
- Forum: Grinders
- Replies: 641
- Views: 49713
Announced: Niche Duo 83mm flat burr grinder
I did say in the 1500 rpm range. DF83 is 1400 rpm, Mazzer Major is 1400-1600 rpm depending on the frequency of the electricity in the country. Ceado e37 line is around 1400 rpm. All in the 1500 rpm range. But the question still remains as to how the lower burr speed of the Duo would affect the taste...