Search found 71 matches

by roasterman
September 27th, 2022, 10:13 pm
Forum: Coffee Roasting
Replies: 7
Views: 333

TC4 and 16x2 Display

It looks like I started the programming over. I found this web address and downloaded this. {link} Is there an Arduino TC4 Artisan setup webpage that's more up-to-date? On the File > Serial Monitor, I didn't see a SEND option in this version of Arduino IDE. I got to page 6 and received an error that...
by roasterman
September 27th, 2022, 2:39 pm
Forum: Coffee Roasting
Replies: 7
Views: 333

TC4 and 16x2 Display

I have the same Arduino and wanted to get everything into a smaller box
Advertisement
by roasterman
September 27th, 2022, 1:42 pm
Forum: Coffee Roasting
Replies: 7
Views: 333

TC4 and 16x2 Display

I downloaded the sketch in 2018. Looking at the TC4 folder, I created, the version I'm using is aArtisanQ_PID_6_7. If there's a new version, where would I download it from? Since it's been 4 years since I set all of this up, how do I load my sketch? The file saved in my folder is titled aArtisanQ_PI...
by roasterman
September 25th, 2022, 6:35 pm
Forum: Coffee Roasting
Replies: 7
Views: 333

TC4 and 16x2 Display

I've been running the TC4 with a 20x4 display. Since I wanted to get a smaller display, for mounting purposes, I've received a 16x2 with I2C interface. The instructions state: LCD Options The sketch supports both 16x2 and 20x4 LCDs. Disable the LCD_4x20 option if using a 16x2 display. A 20x4 LCD is ...
by roasterman
August 31st, 2020, 9:04 am
Forum: Coffee Roasting
Replies: 5
Views: 324

Artisan Lines

MaKoMo, Thanks for the answer. I turned the grids on. They appear on each 100 degree. Is there a way to add more lines, like on every 20 degree?
by roasterman
August 30th, 2020, 10:29 am
Forum: Coffee Roasting
Replies: 5
Views: 324

Artisan Lines

On an older version of Artisan there were horizontal and vertical lines. How can I add these lines back in on the new version of artisan (2.4.0), so I can see the temperature, ex. 300, 400 degrees all the way across the screen while roasting?
by roasterman
July 9th, 2019, 5:41 pm
Forum: Coffee Roasting
Replies: 2
Views: 214

Artisan and Windows?

After researching, I found you can take a Windows S mode computer out of S mode. This would then be in Windows 10 Home. {link}
by roasterman
July 9th, 2019, 10:51 am
Forum: Coffee Roasting
Replies: 2
Views: 214

Artisan and Windows?

I'm using Artisan on Windows 10. Does anyone use Artisan on Windows 10 S ?
by roasterman
May 11th, 2019, 2:22 pm
Forum: Coffee Roasting
Replies: 5
Views: 538

Quest M3s minimum grams

EddyQ, Thank you
by roasterman
May 11th, 2019, 1:25 pm
Forum: Coffee Roasting
Replies: 5
Views: 538

Quest M3s minimum grams

Tom, Thanks. Here's a pic of where I have the probes. There's no probe next to the bottom window. Would 50 grams work, or should i just stay with the 100g? {image}