Recent posts - Page 50
- April 16th, 2024, 4:48 pm
- Forum: Grinders
- Replies: 10
- Views: 452
Any Benefit to Slow Grind Speed
My experience with the Lagom P01 with the 98mm Mizen burrs has been negative for slow to medium grind speeds. There is a change in grind adjustment, slower speeds requiring finer settings for the same dose and timing of espresso; but the taste is unchanged, at least given the five minute gap in tasting. Given the difficulty
- April 16th, 2024, 4:36 pm
- Forum: Coffee Roasting
- Replies: 21
- Views: 747
Highest chance of success - roasters
When I upgraded from a Behmor to my Bullet, it took me about 50 or so roasts until I felt like I really had a handle on roasting on the Bullet. I was using other people's roast charts as guides to help my learning, but I was not using pre-programmed recopies to guide the roast, even to this day I
- April 16th, 2024, 4:32 pm
- Forum: Grinders
- Replies: 10
- Views: 452
Any Benefit to Slow Grind Speed
I've noticed on my Weber Key Mark i that slower grind speeds tend to enhance the clarity of espresso. I usually grind at the slow end of the range
- April 16th, 2024, 4:28 pm
- Forum: Repairs, Restorations & Mods
- Replies: 6
- Views: 121
What is this part... Fiorenzato Bricoletta
Well, looking at a wiring diagram I found, it looks like they had the correct wires attached to the solenoid... I was able to fill the boiler... but when the contactor kicks on to run the boiler, it trips my GFCI.... I tested what I knew how. Each of the L to T lanes in the contactor are actually open
- April 16th, 2024, 4:25 pm
- Forum: Lever Espresso Machines
- Replies: 5
- Views: 452
Londinium Vectis use cases
Thank you both
- April 16th, 2024, 3:52 pm
- Forum: Repairs, Restorations & Mods
- Replies: 5
- Views: 137
Looking for a Niche Zero rubber foot
Could you just buy a set of nice rubber feet and attach them with double-sided tape?
- April 16th, 2024, 3:52 pm
- Forum: Espresso Machines
- Replies: 1378
- Views: 191452
Breville Dual Boiler Mods and Maintenance
Does this sound like it could be a faulty pump? {video}
- April 16th, 2024, 3:48 pm
- Forum: Blog
- Replies: 50
- Views: 2918
Mazzer Philos Comments
The Philos grinder has very distinct clicks. However, the scale goes from 0 to 145; so a lot of clicks. I have no idea what it is like to use a grinder with low vision. But my inexpert suggestion would be to use a different tactile decals at the brew settings, and at the center of the espresso