Recent posts - Page 49
- April 15th, 2024, 6:50 pm
- Forum: Espresso Machines
- Replies: 2246
- Views: 221323
Lelit Bianca User Experience
Take off the top if the vacuum breaker does not have a clear tube to the discharge valve going into the drip tray and is not leaking then it's probably a bad opv valve. If it has a silicone tube from the vacuum valve into the drip tray it could be a bad vacuum valve . If both
- April 15th, 2024, 6:38 pm
- Forum: Espresso Machines
- Replies: 2246
- Views: 221323
Lelit Bianca User Experience
I'm also having an issue where my pump is engaging to fill the steam boiler a lot. I don't remember how often it used to happen but I hear it from the other room turning the pump on for a few seconds many times a day. It also does not happen when the steam boiler is switched off. I opened
- April 15th, 2024, 6:38 pm
- Forum: Lever Espresso Machines
- Replies: 1
- Views: 78
Enrico Cappuccino Amore CE-14 Revisited
Welcome to H-B! Francesco has some descriptions and photographs of units he has seen or restored that may be of some help. {link} Before spending a lot of money on the machine, I would consider some of the experiences and opinions of the machine. If it has a lot of sentimental value to you, then it may
- April 15th, 2024, 6:37 pm
- Forum: Blog
- Replies: 42
- Views: 2471
Mazzer Philos Comments
I know from their site that the collar wheel is the adjuster. Still seems like it would require a fair amount of upper clearance to get a precise view of it, which might limit its suitability for under-counter locations
- April 15th, 2024, 6:30 pm
- Forum: Espresso Machines
- Replies: 8
- Views: 190
Inconsistent extractions on Breville Bambino Plus
As really rough guidelines for medium and medium-dark roasts (lighter than visibly oily) of coffees intended for espresso, a bag will often start to change noticeably in a week to ten days after being opened, maybe two weeks at the outside. This class of coffees generally does well between about a week and a month from roast, assuming that the
- April 15th, 2024, 6:22 pm
- Forum: Blog
- Replies: 4
- Views: 2455
Mazzer Philos Grinder Review
Operation and Ergonomics Here are some pictures to give an idea of the grinder's size: {image} The black one in a setup, next to the Lelti Bianca and Zoshirushi {image} The silver one in the same set up {image} Next to the Fuji and Niche for a size comparison The grinder weighs about 15 pounds
- April 15th, 2024, 6:17 pm
- Forum: Coffee Roasting
- Replies: 136
- Views: 4605
Humidity sensor on exhaust - other gas sensors ?
Rob Hoos sets airflow at 100% from the outset on his 3Kg USRC roaster. At least that's how I understood that point in his paper on tipping. I do that now on my 1Kg propane drum roaster and get very good results, applying consistent heat without tipping. It helped to get used to a fluid bed sample roaster. I don't
- April 15th, 2024, 6:15 pm
- Forum: Lever Espresso Machines
- Replies: 1
- Views: 78
Enrico Cappuccino Amore CE-14 Revisited
I'd like to get my Cappuccino Amore CE-14 in working order. I see I'm a little late to the party from the closed conversations, so I'm opening this one. I'm in need of a pressurized cap/lid for this machine, and a portafilter basket. Does anyone know if there is a make/model of machine that might have a compatible cap?
- April 15th, 2024, 6:14 pm
- Forum: Espresso Machines
- Replies: 8
- Views: 190
Inconsistent extractions on Breville Bambino Plus
Thank you everyone for your suggestions! In reply to Bean_Thinking, I actually don't know how long the beans were sitting in the packet before I bought them so that is a good question. The bag is nearly finished and it has been on my shelf for 2 weeks. I see the recommendations strongly advising I get the 0.1gm
- April 15th, 2024, 5:58 pm
- Forum: Lever Espresso Machines
- Replies: 40
- Views: 1634
ACS waiting times
I was told last week that mine would be shipping out mid-April. I'm just going to hope it gets here by June, but I am not counting on it