Recent posts - Page 2

by kiltev
1 hour ago
Forum: Repairs, Restorations & Mods
Replies: 1
Views: 11

Steam wand valve replacement on Crem ONE

Hello everyone, I am a happy owner of the Crem one 2b r-lfpp (profiler). I always enjoyed joystick style valves more than rotary knobs. I wondered if anyone here has any experience with replacing the valves to joysticks or to different ones in general and if anyone has tips, insights, pointers or any other info on the matter? It
by bznelson91
1 hour ago
Forum: Tips and Techniques
Replies: 3
Views: 66

If I wanted to try traditional(ish) espresso...

And in fact, I can't order the coffee he used, it's only available in Italy. But I'm sure there's a reasonably comparable espresso roast available to me here in the coffee wasteland of the USA Brad
Advertisement
by JRising
1 hour ago
Forum: Repairs, Restorations & Mods
Replies: 1
Views: 32

Inside diameter of Jura milk hose?

If you have the black connector, just find any host that fits it tightly. If the cappuccino froth isn't hot enough, put the clear restrictor in the milk-container end. You can probably find a whole kit of what you need from any Jura dealer, or online if you don't have the connectors. Example: {link}
by bznelson91
1 hour ago
Forum: Tips and Techniques
Replies: 3
Views: 66

If I wanted to try traditional(ish) espresso...

By incredible coincidence, Luca just posted "this" gem on Diaspora (requires Diaspora access, natch). Pretty much covers most things I'm asking, aside from grinder choice, that, and I'm probably not going to order his exact bean, though it's tempting. Brad
by mikel
1 hour ago
Forum: Repairs, Restorations & Mods
Replies: 1
Views: 20

Under pressure at idle and over pressure when pulling a shot

Looks like both the expansion valve in your waste tray, and bypass on the pump, need adjustment. The expansion valve caps the max pressure in the system (often adjusted to a max of 12 bars), and the bypass sets your max pressure delivered by the pump. When I have pressure leftover in the brew boiler, then turn on the machine
by robertfarcas
1 hour ago
Forum: Repairs, Restorations & Mods
Replies: 1
Views: 20

Under pressure at idle and over pressure when pulling a shot

Hello hello! Coming back with another questions that I'm hoping to find the answer to. I have the older model GB5, and a dillema. At idle the pressure is around 6-7 bars, on free flow without a portafilter the pressure shoots to around 14-15 bars, and when pulling a shot it goes off the gauge, past 15 bars.
by JRising
2 hours ago
Forum: Repairs, Restorations & Mods
Replies: 1
Views: 90

Boilergate question

Why not ask them. You'll want to explain the situation in a lot more depth, perhaps include whether or not the machine is less than a year old from date of original sale, and why it needs a new boiler. {link}
by JRising
2 hours ago
Forum: Repairs, Restorations & Mods
Replies: 1
Views: 35

E61 overpressure during backflushing

Sounds totally normal to me. Normally the pressure in the brew circuit is limited by the pump which bypasses output at 9 bar (or wherever it's set) and the OPV which will relieve pressure in the brew boiler when the expansion due to heat brings the pressure to 12 bar. If you close off the exit from the brew
by ojt
2 hours ago
Forum: Buying Advice
Replies: 5
Views: 184

Have owned a La Pavoni Professional for over a year... need decent grinder.

At that price range, another vote for a hand grinder. For the lower end consider Kingrinder (on Amazon I think, K series) which people seem to appreciate. A bit up from there you start having OE Lido, 1zpresso (J, K, whatever). Then Comandante / Kinu / Pietro. Hand cranking really doesn't bring much extra hassle to La Pavoni routine
by JRising
2 hours ago
Forum: Repairs, Restorations & Mods
Replies: 10
Views: 72

Brasilia Club - boiler keep pushing out gasket

It could just be expansion pressure of the boiler is allowing the pressure to exceed what the gasket can withstand. I'm not familiar with a machine of that type (Faema Family, Imat Professional, ECM CasaV, Proftec Pro 500, etc) that doesn't have some sort of OPV working as an expansion valve. If you let it heat with the steam valve