Recent posts - Page 40
- March 25th, 2024, 5:11 pm
- Forum: Lever Espresso Machines
- Replies: 21
- Views: 275
Troubleshooting la Peppina double basket fit
Orphan Espresso used to have 45 mm dosing funnels, I have one, but you can still get a small one there which is 43.5 which should fit the La Peppina and the even smaller Caravel filters. I picked up mine long before 3D printing was an option. {link} You could search for 45 mm dosing funnels, print one
- March 25th, 2024, 5:10 pm
- Forum: Knockbox
- Replies: 127
- Views: 7736
Beanconqueror - App
Thanks, Lars, for the continued work on Beanconqueror. I like that I can link the Decent scale to it and tare from the app. It makes pre-weighing espresso doses easier than taring on the scale directly
- March 25th, 2024, 5:02 pm
- Forum: Grinders
- Replies: 46
- Views: 2875
Fiorenzato AllGround review
I don't think The Fiorenzato AllGround is particularly loud, and also I find its sound to be pleasing. It's certainly no where near as loud as a Baratza
- March 25th, 2024, 4:59 pm
- Forum: Repairs, Restorations & Mods
- Replies: 4
- Views: 89
QuickMill Carola - Replacing steam valve question
My QuickMill Carola steamer needs a new valve as the original one is dripping. I have purchased a new valve and my question is whether any sealant is used between the back of the valve and the copper fitting that connects it (via a small section of copper tube) to the boiler. I assume I should disconnect the short
- March 25th, 2024, 4:58 pm
- Forum: Grinders
- Replies: 46
- Views: 2875
Fiorenzato AllGround review
Not sure if you already purchased a grinder, but I have the Fiorenzato AllGround and it's GREAT! It has the precision needed for dialing in. I have a La Pavoni Professional (2003 model), and it needs very fine adjustments, which are no problem with the Fiorenzato AllGround. I've been able to dial my espresso in quite easily and make
- March 25th, 2024, 4:34 pm
- Forum: Grinders
- Replies: 46
- Views: 2875
Fiorenzato AllGround review
I have an issue when coarse settings are not enough to make a standard espresso with 9 bar, I have to rotate wheel to maximum coarse position but the grind size is still too big. Fiorenzato sells shims which should be placed under burrs {link} but the price in $41 is really overkill for just 3 small pieces of
- March 25th, 2024, 4:20 pm
- Forum: Lever Espresso Machines
- Replies: 21
- Views: 275
Troubleshooting la Peppina double basket fit
I use a 3d printed funnel. I've also added small magnets to the bottom lip. Not every basket is magnetic though. {image} {image} Here: {link}