Thanks Dan, didn't think of it makes sense!

Boiler lid and studs The boiler hasn't been left alone, I've been working on it in the background. The first problem was getting the aluminum ring off that secures the lid to the boiler via 9 studs and nuts. The boiler gasket was slowly failing in the past, and as a result corrosion of the ring plugged all the

Standard big hopper for e65s/e80 for sale $150 or trade for small hopper. {image}

Thanks for all the feedback. You are correct. The pump is not running until after the gauge has peaked. When I run it, the pressure snaps back to 9 bar. I adjusted the bypass on the pump as low as about 3 bar and as high as about 10. (This reminds my... i also have a mavea adjustable bypass filter

Pretty sure that all seals on the Flair58 are made out of silicone

It depends on the composition of the seals. Although Haynes Lubri-Film Plus can't be used on natural rubber, it can be used to seal and lube metal, synthetic rubber and plastic parts. These days, Nitrile, Neoprene, Ethylene Propylene, Silicone, Fluorocarbon, and PTFE (IE Teflon) are used for most O-rings and seals in preference to natural rubber. I've used it on

Lubri Film Plus is a petroleum based lube and shouldn't be used on rubber parts

Use it before on piston seals for the same reason. Although it worked, I wouldn't necessarily use it again for that application. Dow 111 and Loxeal #4 are undoubtedly superior. However, for your Flair58 plunger seal, I believe it'll do just fine

I merged your 4 other threads on your repair efforts into this one. It's easier to help you if your questions are in one place

I usually use Molykote 111 but only have Lubri-Film Plus at hand at the moment. It's specified maximum temperate is 210F/98C. Will it work to lubricate the plunger gasket of a Flair espresso machine?